Analytical solutions for combined bolt-grouting and lining supporting in viscoelastic-plastic rock mass

被引：0
|
作者：
Wang H.-N. [1 ,2 ]
Zeng G.-S. [2 ]
Jiang M.-J. [1 ,3 ]
机构：
[1] State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University, Shanghai
[2] School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai
[3] Department of Geotechnical Engineering, College of Civil Engineering, Tongji University, Shanghai
来源：
Wang, Hua-Ning (wanghn@tongji.edu.cn) | 1600年 / Tsinghua University卷 / 33期
关键词：
Analytical solution; Bolt-grouting; Liner; Sequential construction; Viscoelastic-plastic;
D O I：
10.6052/j.issn.1000-4750.2014.09.0789
中图分类号：
学科分类号：
摘要：
The analytical solutions were derived for a deeply buried circular tunnel in a viscoelastic-plastic rock mass accounting for sequential excavation, bolt-grouting, and lining support. The solutions of stress and displacement as well as the radius of the plastic zone were presented for an enlargement excavation process with a time-dependent tunnel radius. The effect of longitudinal excavation was also considered. After reinforcement with bolt-grouting at any time, the reinforced rock mass was treated as homogeneous elastic-plastic material, with cylindrical orthogonal anisotropic characteristics to reflect the radial strengthening of the bolts in the elastic phase, as well as enhanced strength parameters to reflect the role of bolt-grouting in the plastic phase. The solutions for rock and liner in supporting stage were derived for the two cases, elastic and elasto-plastic, for reinforced rock. Moreover, the conditions were also given for emerging new plastic zones and the expression for plastic radius in reinforced rock. According to the solutions, stresses and displacements over time were analyzed at positions with different radii, and the influence of reinforcement and installation times of bolt-grouting reinforcement were illustrated. The solutions can be applied to the preliminary design of tunnel construction in similar conditions. © 2016, Engineering Mechanics Press. All right reserved.
引用
收藏
页码：176 / 187
页数：11
相关论文
共 25 条
  • [1] Wen J., Study on mechanical analysis of tunnel initial support and its parameters optimization, (2012)
  • [2] Cai Y., Esaki T., Jiang Y., An analytical model to predict axial load in grouted rock bolt for soft rock tunneling, Tunnelling and Underground Space Technology, 19, 6, pp. 607-618, (2004)
  • [3] Dai H.L., Wang X., Xie G.X., Wang X.Y., Theoretical model and solution for the rheological problem of anchor-grouting a soft rock tunnel, International Journal of Pressure Vessels and Piping, 81, 9, pp. 739-748, (2004)
  • [4] Wang X., Bai J., Chen Y., Et al., Time-dependent laws and initial application of bearing features of bolt-grouting structure in soft rock roadway, Chinese Journal of Geotechnical Engineering, 35, 3, pp. 469-475, (2013)
  • [5] Wang H., Cao Z., Li Y., Analytical research of lined circular tunnel in viscoelastic rock mass considering the effect of cross-section and longitudinal construction, Chinese Journal of Geotechnical Engineering, 33, 2, pp. 1159-1166, (2011)
  • [6] Wang H.N., Li Y., Ni Q., Utili S., Jiang M.J., Liu F., Analytical solutions for the construction of deeply buried circular tunnels with two liners in rheological rock, Rock Mechanics and Rock Engineering, 46, 6, pp. 1481-1498, (2013)
  • [7] Liu Q., Yang M., Analysis on deformation of surrounding rock masses of tunnel using bolt-grouting support and its mechanism, Chinese Journal of Rock Mechanics and Engineering, 21, 8, pp. 1158-1161, (2011)
  • [8] Hua X., Lu F., Xie G., Rheological study on bolt-grouting supported roadways in soft rock, Chinese Journal of Rock Mechanics and Engineering, 22, 2, pp. 297-303, (2003)
  • [9] Bobet A., Elastic solution for deep tunnels. Application to excavation damage zone and rockbolt support, Rock Mechanics and Rock Engineering, 42, 2, pp. 147-174, (2009)
  • [10] Fahimifar A., Ranjbarnia M., Analytical approach for the design of active grouted rockbolts in tunnel stability based on convergence-confinement method, Tunnelling and Underground Space Technology, 24, 4, pp. 363-375, (2009)
123