Analysis of arc stability of self-shielded flux-cored wire laser-arc hybrid

被引：0

作者：

Liu X. ^{[1
,2
]}

Sun F. ^{[1
]}

Zhao Y. ^{[2
]}

Xu K. ^{[2
]}

Wang Y. ^{[2
]}

机构：

[1] Harbin University of Science and Technology, Harbin

[2] Harbin Welding Institute Limited Company, Harbin

来源：

Sun, Fenglian (sunflian@163.com) | 2018年 / Harbin Research Institute of Welding卷 / 39期

关键词：

Arc stability; Laser-arc hybrid welding; Self-shielded flux-cored wire; Welding parameters;

D O I：

10.12073/j.hjxb.2018390167

中图分类号：

学科分类号：

摘要：

The influence of arc stability on different process parameters during Laser-arc hybrid welding which used self-shielded flux-cored wire (414N-O) with the help of Hannover Analysator and high speed photography were studied. The results indicated that the probability of arc point drift and short circuiting transfer of self-shielded flux-cored wire are reduced with the addition of laser. Oppositely, arc length is elongated and the arc stability is improved. In the parameters, the distance between laser and arc(DLA) and wire feed speed have appreciable impact on the mean actual output current, and the stability of current coefficient of variation.is significantly affected by welding voltage and wire feed speed. The influence range of laser power to mean actual output current is related to DLA and wire feed rate, and the influence declines with DLA and wire feed rate increase. The influence range of welding voltage to mean actual output current is related to DLA and it has the greatest impact when DLA is 0 mm. Laser leading is more beneficial than laser trailing to the stability of current coefficient of variation. © 2018, Editorial Board of Transactions of the China Welding Institution, Magazine Agency Welding. All right reserved.

引用

页码：17 / 23

页数：6

共 5 条

[1] Liu H., Li Z., Shi Y., Evaluation on operational performance of self-shield flux cored wire, Transactions of the China Welding Institution, 32, 5, pp. 101-104, (2011)
[2] Feng X., Liu H., Zhou Z., Analysis on the arc stability of self-shielded flux-cored wire, Electric Welding Machine, 39, 6, pp. 30-33, (2009)
[3] Zhang T., Li Z., Jing H., Et al., Analysis and evaluation of arc stability of self-shielded flux-core wire in all-position welding, Transactions of the China Welding Institution, 35, 8, pp. 99-102, (2014)
[4] Liu F., Zhang H., Du S., Et al., Influence of laser power on arc and droplet behaviors in droplets on CO<sub>2</sub> laser-MAG arc hybrid welding, Journal of Mechanical Engineering, 49, 4, pp. 75-82, (2013)
[5] Wang W., Wang X., Zhao Z., Et al., Influential factors in laser-MAG hybrid welding process, Transactions of the China Welding Institution, 27, 2, pp. 6-10, (2006)

← 1 →