Influence of the heat treatment processes on the properties of high entropy alloys based on Al-Cr-Fe-Mn-Ni system

被引：0
|
作者：
Mitrica D. [1 ]
Soare V. [1 ]
Constantin I. [1 ]
Burada M. [1 ]
Olaru M.T. [1 ]
Badilita V. [2 ]
Soare V. [1 ]
Stoiciu F. [3 ]
Popescu G. [4 ]
Carcea I. [5 ]
机构：
[1] National R and D Institute for Nonferrous and Rare Metals, New Materials and Technologies Laboratory, 102 Biruintei Blvd, Pantelimon
[2] National R and D Institute for Nonferrous and Rare Metals, Physical and Chemical Laboratory, 102 Biruintei Blvd, Pantelimon
[3] National R and D Institute for Nonferrous and Rare Metals, Microscopic Characterization Laboratory, 102 Biruintei Blvd, Pantelimon
[4] Polytechnic University of Bucharest, Centre for Research and Expertizing of Special Materials, 313 Splaiul Independentei, Sector 6, Bucharest
[5] Gheorghe Asachi Technical University of Iasi, Faculty of Materials Science and Engineering, 67 Profesor Dimitrie Mangeron Blvd., Iasi
来源：
Mitrica, Dumitru (dmitrica@imnr.ro) | 1600年 / ASTM International卷 / 06期
关键词：
Characterization; Heat treatment; High entropy alloy;
D O I：
10.1520/MPC20170018
中图分类号：
学科分类号：
摘要：
In the present paper, high entropy alloys based on an aluminum-chromium-iron-manganese-nickel (Al-Cr-Fe-Mn-Ni) system were prepared by induction melting and annealed in an inert atmosphere. The resulting samples were analyzed by optical microscopy, scanning electron microscopy, and X-ray diffraction to determine the structural characteristics before and after the heat treatment process. Significant phase transformations and changes in the phase distribution were noticed after the heat treatment process. The results were discussed against the thermodynamic criteria calculations for most promising compositions. Hardness tests were provided for the selected samples to indicate the changes in the mechanical properties between various compositions and between as-cast and annealed samples. Results indicated that the heat treatment process determined a significant hardness increase in one of the studied high entropy alloys. © Copyright 2017 by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959.
引用
收藏
相关论文
共 50 条
  • [1] Phase Stability of L21 in Al-Cr-Fe-Mn-Ni High Entropy Alloys and Properties Study
    Yi, Hui
    Wu, Changjun
    Zhou, Chen
    Liu, Ya
    Lu, Xiaowang
    Su, Xuping
    Cailiao Daobao/Materials Reports, 2024, 38 (11):
  • [2] Heat treatments' effects on the microstructure and mechanical properties of an equiatomic Al-Cr-Fe-Mn-Ni high entropy alloy
    Munitz, A.
    Meshi, L.
    Kaufman, M. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 689 : 384 - 394
  • [3] The microstructure and mechanical properties of novel Al-Cr-Fe-Mn-Ni high-entropy alloys with trimodal distributions of coherent B2 precipitates
    Zhang, L. J.
    Guo, K.
    Tang, H.
    Zhang, M. D.
    Fan, J. T.
    Cui, P.
    Ma, Y. M.
    Yu, P. F.
    Li, G.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 757 : 160 - 171
  • [4] Evaluation of the impact of Mn and Al on the microstructure of Fe-Co-Ni-Cr based high entropy alloys
    Ilinich-Shaw, M.
    Wang, D.
    Huang, X.
    Yandt, S.
    CANADIAN METALLURGICAL QUARTERLY, 2024, 63 (02) : 329 - 340
  • [5] Phase Prediction, Microstructure and Mechanical Properties of Fe-Mn-Ni-Cr-Al-Si High Entropy Alloys
    Mahmoud, Essam R., I
    Shaharoun, Awaluddin
    Gepreel, Mohamed A.
    Ebied, Saad
    METALS, 2022, 12 (07)
  • [6] Design of Eutectic High Entropy Alloys in Al–Co–Cr–Fe–Ni System
    Ali Shafiei
    Metals and Materials International, 2021, 27 : 127 - 138
  • [7] The influence of C addition on microstructure and compressive properties of Al-Cr-Fe-Ni high entropy alloys
    Lv, Chuanmeng
    Ma, Minyu
    Yang, Fan
    Huang, Can
    Zhao, Chao
    Bai, Shaobin
    Zhang, Shugang
    Gao, Wen
    Ma, Yanlong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1021
  • [8] Effect of Al on structure and mechanical properties of Fe-Mn-Cr-Ni-Al non-equiatomic high entropy alloys with high Fe content
    Stepanov, N. D.
    Shaysultanov, D. G.
    Chernichenko, R. S.
    Tikhonovsky, M. A.
    Zherebtsov, S. V.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 770 : 194 - 203
  • [9] Effects of Cr/Ni ratio on physical properties of Cr-Mn-Fe-Co-Ni high-entropy alloys
    Wagner, Christian
    Ferrari, Alberto
    Schreuer, Jurgen
    Couzinie, Jean-Philippe
    Ikeda, Yuji
    Koermann, Fritz
    Eggeler, Gunther
    George, Easo P.
    Laplanche, Guillaume
    ACTA MATERIALIA, 2022, 227
  • [10] Design of Eutectic High Entropy Alloys in Al-Co-Cr-Fe-Ni System
    Shafiei, Ali
    METALS AND MATERIALS INTERNATIONAL, 2021, 27 (01) : 127 - 138
12345