Fracture mechanical behaviors and acoustic emission characteristics of Beishan granite under CCNBD test

被引：0
|
作者：
Liu L. [1 ]
Du G. [1 ]
Li E. [2 ]
Guo Q. [1 ]
Xia H. [1 ]
机构：
[1] Institute of Geotechnical Engineering, Southeast University, Nanjing
[2] National Defense Engineering College, PLA Army Engineering University, Nanjing
来源：
Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering | 2020年 / 39卷
关键词：
Acoustic emission; Beishan granite; CCNBD; Cyclic loading; Fracture toughness; Rock mechanics;
D O I：
10.13722/j.cnki.jrme.2019.1103
中图分类号：
学科分类号：
摘要：
To investigate the fracture mechanical behaviours and acoustic emission characteristics of Beishan granites, the MTS815 Flex Test GT rock mechanics testing system and acoustic emission(AE) three-dimensional positioning monitoring system are used to conduct Cracked Chevron Notched Brazilian Disc CCNBD tests with two different loading modes(static loading and cyclic loading). Experimental results show that mean value of KIC under static loading is 1.180 MPa•m1/2, while mean value of KIC under cyclic loading is 1.153 MPa•m1/2, which is reduced by 2.3%. The existence of subcritical crack growth is verified by cyclic loading test, and it is turned out that the failure mode of CCNBD specimens under cyclic loading do not change, the specimens are still brittle. Based on the mechanical characteristic curves and acoustic emission characteristics, the fracture propagation process and fracture characteristics of CCNBD specimens under static and cyclic loading are studied. © 2020, Science Press. All right reserved.
引用
下载
收藏
页码：3237 / 3244
页数：7
相关论文
共 21 条
  • [1] ZUO Jianping, ZHOU Hongwei, FAN Xiong, Et al., Research on fracture behavior of Beishan granite after heat treatment under three-point bending, Chinese Journal of Rock Mechanics and Engineering, 32, 12, pp. 2422-2430, (2013)
  • [2] DENG Chaofu, LIU Jianfeng, CHEN Liang, Et al., Fracture mechanical behaviors and acoustic emission characteristics of Beishan granites with different particle sizes, Rock and Soil Mechanics, 37, 8, pp. 2313-2320, (2016)
  • [3] LI Ying, CHEN Liang, LIU Jianfeng, Et al., Experimental study on influence of saturation process and grain size on the fracture toughness of the Beishan granite, Chinese Journal of Rock Mechanics and Engineering, 37, pp. 3169-3177, (2018)
  • [4] WU Lizhou, WANG Qizhi, JIA Xueming, Determination of mode-I rock fracture toughness with cracked chevron notched Brazilian disc(CCNBD) and application of size effect law, Chinese Journal of Rock Mechanics and Engineering, 23, 3, pp. 383-390, (2004)
  • [5] PENG Jianwen, LI Changhong, MIAO Shengjun, Experimental investigation for effect of size on sandstone mode I fracture, Chinese Journal of Engineering, 39, 10, pp. 1477-1484, (2017)
  • [6] JIA Xueming, WANG Qizhi, Calibration of stress intensity factor for new type of fracture toughness specimen CCNBD suggested by ISRM, Chinese Journal of Rock Mechanics and Engineering, 22, 8, pp. 1227-1233, (2003)
  • [7] WANG Q Z, JIA X M, WU L Z., Wide-range stress intensity factors for the ISRM suggested method using CCNBD specimens for rock fracture toughness tests, International Journal of Rock Mechanics and Mining Sciences, 41, pp. 709-716, (2004)
  • [8] FAN Hong, ZHANG Sheng, GOU Xiaoping, Et al., A new numerical calibration of the critical stress intensity factor for the CCNBD specimens used in rock fracture toughness test, Chinese Journal of Applied Mechanics, 28, 4, pp. 416-422, (2011)
  • [9] WANG Q Z, GOU X P, ZHANG S., Recalibration and clarification of the formula applied to the ISRM-suggested CCNBD specimens for testing rock fracture toughness, Rock Mechanics and Rock Engineering, 46, pp. 303-313, (2013)
  • [10] CUI Zhendong, LIU Daan, AN Guangming, Et al., Research for determining mode I rock fracture toughness K<sub>IC</sub> using cracked chevron notched Brazilian disc specimen, Rock and Soil Mechanics, 31, 9, pp. 2743-2748, (2010)
123