BOF blowing process challenges for high rate of iron ore pellet addition - Process development and results at Ternium Brasil

被引：0

作者：

Carvalho, Daniel ^{[1
]}

Castro, Herbert ^{[1
]}

Demuner, Leonardo ^{[1
]}

Viana, Marcos ^{[1
]}

Formage, Roberto ^{[1
]}

Wojnar, Pavel ^{[2
]}

机构：

[1] Ternium Brasil, Rio de Janeiro, RJ, Brazil

[2] Primetals Technologies Czech Republic S.r.o., Moravská Ostrava, Czech Republic

来源：

Iron and Steel Technology | 2018年 / 15卷 / 04期

关键词：

Iron ore pellets - Steelmaking - Iron - Iron ores - Scrap metal reprocessing - Specific heat - Iron and steel industry - Pelletizing - Product design;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

At Ternium Brasil, formerly thyssenkrupp CSA, a positive heat balance at the BOF process is faced, mainly because of low utilization of scrap and plant design. A singular logistic concept for hot metal transport between the blast furnace and the steel plant was established to optimize transportation and energy balance. Up to 80 kg of iron ore pellets per ton of steel is necessary for a 340-t BOF heat balance. In order to accomplish this, a stable blowing process and intensive operational development have been executed: a slopping rate reduction of 80% was achieved without changing the blowing time. This paper describes the steps of this development and the results. © 2018 Air Products and Chemicals, Inc.

引用

页码：44 / 49

共 7 条

[1] Development of Blowing Process for High Manganese Hot Metal in BOF Steelmaking
D. Satish Kumar
Rameshwar Sah
V. R. Sekhar
S. C. Vishwanath
Transactions of the Indian Institute of Metals, 2016, 69 : 775 - 782
[2] Development of Blowing Process for High Manganese Hot Metal in BOF Steelmaking
Kumar, D. Satish
Sah, Rameshwar
Sekhar, V. R.
Vishwanath, S. C.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2016, 69 (03) : 775 - 782
[3] Utilization of High-Alumina Iron Ore in Pellet Making Through Process Optimization
Kumar, Ravindra
Sagar, Ravi Kant
Sah, Rameshwar
Kumar, Vyshnu
Srinidhi, Raghunath
Balachandran, G.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2024, : 3293 - 3302
[4] DEVELOPMENT OF AN IRON-ORE SINTERING PROCESS WITH THE ADDITION OF MINI-BRIQUETTES
MATSUNAGA, Y
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (04): : S70 - S70
[5] On the results of putting into practice pellet production process in controlled atmosphere at the Kachkanar iron ore mining and dressing complex
Novikov, V.F.
Gubanov, V.I.
Stal', 1992, (01): : 18 - 19
[6] DEVELOPMENT OF SMELTING REDUCTION PROCESS OF IRON-ORE .1. COMPARISON OF SMELTING REDUCTION OF IRON-ORE WITH CHROME ORE IN A 1 T TOP AND BOTTOM BLOWING CONVERTER
MATSUO, M
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (12): : S970 - S970
[7] Development of high-strength ceramsite via sintering of iron ore tailings: Process optimization and properties
Wang, Liang
Tian, Hongxiang
Lei, Wenyu
Dai, Nan
Wang, Huan
Construction and Building Materials, 2024, 457

← 1 →