Fatigue performance analysis of weld toe and root of thick T-joint based on local strain energy density

被引：0

作者：

Liu X. ^{[1
]}

Chen G. ^{[2
]}

Meng Q. ^{[1
]}

Gong B. ^{[2
]}

Wang C. ^{[1
]}

机构：

[1] Jiangsu XCMG Construction Machinery Research Institute Ltd., Xuzhou

[2] Tianjin University, Tianjin

来源：

Hanjie Xuebao/Transactions of the China Welding Institution | 2020年 / 41卷 / 09期

关键词：

Fatigue assessment; Finite element; Strain energy density;

D O I：

10.12073/j.hjxb.20191112001

中图分类号：

学科分类号：

摘要：

In this paper, for the purpose of evaluating the fatigue life of the loader's front frame, three typical welded joints are extracted from the key parts of the welded structure of the front frame, and the fatigue test and analysis are carried out. Based on the local strain energy density method, the fatigue life curve is obtained through the experimental data, the accuracy and applicability of the theory are then verified by the fatigue data of the cross joint in the literature. The results show that the local strain energy density method can be used for the fatigue assessment of weld root and weld toe failure. Fatigue cracks at different positions will affect the rigidity of the structure, and thus the fatigue life of the structure. The influence of the size of the weld foot and the penetration depth of the joint on the fatigue life of the welded joint is studied, then derived the fatigue failure position transition interval from the local strain energy density method. The accuracy of the transition interval between weld toe failure and the root failure was verified by the fatigue data in the literature, which provides a basis for the fatigue design of partial penetration T-joints. Copyright © 2020 Transactions of the China Welding Institution. All rights reserved.

引用

页码：74 / 80

页数：6

共 17 条

[1] Huo Lixing, Fracture behavior and evaluation of welded structure, (2000)
[2] Wang Wenxian, Welding structure, (2018)
[3] Radaj D., Review of fatigue strength assessment of non-welded and welded structures based on local parameters, International Journal of Fatigue, 18, 3, pp. 153-170, (1996)
[4] Frick W., Review of fatigue analysis of welded joints: state of development, Marine Structure, 16, pp. 185-200, (2003)
[5] Hobbacher A., Recommendations for fatigue design of welded joints and components, (2016)
[6] Veritas D N., Fatigue design of offshore steel structures, (2016)
[7] Lazzarin P., A finite-volume-energy based approach to predict the static andfatigue behavior of components with sharp V-shaped notches, International Journal of Fatigue, 112, 3, pp. 275-298, (2001)
[8] Williams M L., Stress singularities resulting from various boundary conditions in angular corners of plates in tension, Journal of Applied Mechanics, 19, pp. 526-528, (1952)
[9] Gross B, Mendelson A., Plane elastostatic analysis of V-notched plates, International Journal of Fracture Mecanics, 8, pp. 267-276, (1972)
[10] Zappalorto M, Lazzarin P, Yates J R., Elastic stress distributions for hyperbolic and parabolic notches in round shafts under torsion and uniform antiplane shear loadings, International Journal of Solids and Structures, 45, pp. 4879-4901, (2008)

← 1 2 →