Experimental study on vibrating fluidization characteristics of wet particles

被引:1
|
作者
Gao J. [1 ,2 ]
Zhong W. [1 ,2 ]
Xu H. [3 ]
Yuan Z. [1 ,2 ]
机构
[1] Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, Southeast University, Nanjing
[2] School of Energy and Environment, Southeast University, Nanjing
[3] School of Energy and Power Engineering, Jiangsu University, Zhenjiang
关键词
Bed pressure drop; Minimum fluidization velocity; Vibrating fluidized bed; Wet particles;
D O I
10.3969/j.issn.1001-0505.2018.01.011
中图分类号
学科分类号
摘要
Experimental studies on vibrating fluidization characteristics of wet particles are carried out in a vibrating fluidized bed with a bed (140 mm×70 mm×600 mm). The effects of vibration intensity Γ(0 to 1.2), liquid content W(0 to 6.8%) and particle size dp(1.0 to 2.6 mm) on the fluidization characteristics were studied, including flow pattern, pressure drop and minimum fluidization velocity. The study results show that the vibrating fluidized bed of wet particles can improve the channeling of the wet particle fluidization and make the fluidizations more stable. During the deceleration process, the pressure drop of wet particles in the vibrating fluidized bed is observably lager than that of the ordinary fluidized bed at the fixed bed stage. However, at the second fluidization stage, pressure drops of the two fluidized beds were similar. Meanwhile, the pressure drop in the wet particle vibrating fluidized bed decreases firstly and then increases with the increase of the liquid content. In the wet particle vibrating fluidized bed, the minimum fluidization velocity decreases with the increase of the vibration intensity, increases firstly and then decreases with the increase of the liquid content, increases with the increase of the particle size. The calculation formula of the minimum fluidization velocity of Geldart-D wet particles in vibrating fluidized beds is obtained. © 2018, Editorial Department of Journal of Southeast University. All right reserved.
引用
收藏
页码:71 / 77
页数:6
相关论文
共 21 条
  • [1] Narvaez I., Orio A., Aznar M.P., Et al., Biomass gasification with air in an atmosphere bubbling fluidized bed, Ind Eng Chem, 35, pp. 2110-2120, (1996)
  • [2] Mikami T., Kamiya H., Horio M., Numerical simulation of cohesive powder behavior in a fluidized bed, Chemical Engineering Science, 53, 10, pp. 1927-1940, (1998)
  • [3] Clarke K.L., Pugsley T., Hill G.A., Fluidization of moist sawdust in binary particle systems in a gas-solid fluidized bed, Chemical Engineering Science, 60, 24, pp. 6909-6918, (2005)
  • [4] Weber S., Briens C., Berruti F., Et al., Agglomerate stability in fluidized beds of glass beads and silica sand, Powder Technology, 165, 3, pp. 115-127, (2006)
  • [5] Xu H.B., Zhong W., Jin B.C., Et al., Flow pattern and transition in gas-liquid-solid three phase spouted bed, Powder Technology, 267, pp. 18-25, (2014)
  • [6] Xu H.B., Zhong W.Q., Yu A.B., Et al., Spouting characteristics of wet particles in a conical-cylindrical spoutedbed, Industrial & Engineering Chemistry Research, 54, 40, pp. 9894-9902, (2015)
  • [7] Xu H., Zhong W., Yu A., Experimental study on the agglomerate characteristics of particles in the wet spouted bed, Journal of Engineering Thermophysics, 38, 1, pp. 127-128, (2017)
  • [8] Xu H., Zhong W., Yu A., Et al., Experimental study on the hydrodynamic characteristics of the fluidized bed with wet particles, Journal of Engineering Thermophysics, 38, 6, pp. 1257-1262, (2017)
  • [9] Mawatari Y., Koide T., Tatemoto Y., Et al., Effect of particle diameter on fluidization under vibration, Powder Technology, 123, 1, pp. 69-74, (2002)
  • [10] Mawatari Y., Tatemoto Y., Noda K., Prediction of minimum fluidization velocity for vibrated fluidized bed, Powder Technology, 131, 1, pp. 66-70, (2003)