Surrounding rocks control technology and application of automatically formed roadway in mining without coal pillar and gateroad excavation

被引：0
|
作者：
Zhu Z. [1 ,2 ]
Zhang K. [1 ,3 ,4 ]
He M. [1 ,2 ]
Yang J. [1 ,2 ]
Gao Q. [1 ,2 ]
Wei Q. [1 ,2 ]
机构：
[1] State Key Laboratory of Geomechanics and Deep Underground Engineering, China University of Mining & Technology(Beijing), Beijing
[2] School of Mechanics and Civil Engineering, China University of Mining & Technology(Beijing), Beijing
[3] Intelligent Control Technology Branch of China Coal Research Institute, Beijing
[4] Beijing Tiandi-Marco Electro-Hydraulic Control System Co., Ltd., China Coal Technology and Engineering Group, Beijing
来源：
Zhang, Kexue (zhkexue@163.com) | 2018年 / China Coal Society卷 / 43期
关键词：
Automatic gateroad formation; Control of surrounding rocks; Mining without pillars; Mining without roadway excavation; Roof cutting and pressure relief;
D O I：
10.13225/j.cnki.jccs.2017.1194
中图分类号：
学科分类号：
摘要：
In terms of the fact that the traditional mining method causes the high drivage rate and low resource recovery rate, a new mining technology, mining without coal pillars and gateroad excavation, was put forward based on the idea of roof cutting and automatically formed roadway. The concrete mining method of working face and the principle of roadway formation were explicated by comparing with traditional coal mining technology. Through the analysis of the movement characteristics of roof rock, a mechanical model of surrounding rock structure was established, and the formula for calculating the resistance of roof support is derived. Supporting technology matching with the new mining technology was studied on the basis of the characteristics of surrounding rock movement. Besides, the zoning supporting concept was proposed and applied in the field, which means that different support measures should be taken in different areas. Field test results show that the new mining technology has achieved the goal of mining without coal pillars and gateroad excavation in advance. © 2018, Editorial Office of Journal of China Coal Society. All right reserved.
引用
收藏
页码：52 / 60
页数：8
相关论文
共 20 条
  • [1] Zhang K., Determining the reasonable width of chain pillar of deep coal seams roadway driving along next goaf, Journal of China Coal Society, 36, pp. 28-35, (2011)
  • [2] Qian M., The structural model of overlying strata in the stope and its application, Journal of China Institute of Mining Technology, 2, pp. 1-11, (1982)
  • [3] Song Z., Basic rules for stope overlying strata, Journal of Shandong Institute of Mining Technology, 1, pp. 12-25, (1979)
  • [4] Yuan L., Scientific conception of precision coal mining, Journal of China Coal Society, 42, 1, pp. 1-7, (2017)
  • [5] Han K., Wang Y., Developing trend and expectation of energy consume in China, Journal of China University of Mining & Technology, 33, 1, pp. 1-5, (2004)
  • [6] Zhang K., Jiang Y., Zhang Z., Et al., Determining the reasonable width of narrow pillar of roadway in gob entry driving in the large pillar, Journal of Mining & Safety Engineering, 31, 2, pp. 255-262, (2014)
  • [7] Hua X., Development status and improved proposals on gob-side entry retaining support technology in China, Coal Scienceand Technology, 34, 12, pp. 78-81, (2016)
  • [8] Tan Y., Yu F., Ning J., Et al., Adaptability theory of roadside supporting gob-side entry retaining and its supporting design, Journal of China Coal Society, 41, 2, pp. 376-382, (2016)
  • [9] Zhang N., Han C., Kan J., Et al., Theory and practice of surrounding rock control for pillarless god-side entry retaining, Journal of China Coal Society, 39, 8, pp. 1635-1641, (2014)
  • [10] Bai J., Zhou H., Hou C., Et al., Development of support technology beside roadway in goaf-side entry retaining for next sublevel, Journal of China University of Mining and Technology, 33, 2, pp. 59-62, (2004)
12