The microstructure and hardness of Ni-Co-Al-Ti-Cr quinary alloys

被引:0
|
作者
机构
[1] Christofidou, K.A.
[2] Jones, N.G.
[3] 1,Pickering, E.J.
[4] Flacau, R.
[5] Hardy, M.C.
[6] Stone, H.J.
来源
Christofidou, K.A. (kc424@cam.ac.uk) | 1600年 / Elsevier Ltd卷 / 688期
关键词
The effects of Ni:Co and Al:Ti ratios on the room temperature microstructure; hardness and lattice parameter of twenty-seven quinary Ni-Co-Al-Ti-Cr alloys have been evaluated. All of the alloys exhibited a uniform γ-γ′ microstructure. Differential scanning calorimetry (DSC) showed that the liquidus and solidus temperatures of the alloys increased with greater Al:Ti ratios; decreased with Cr concentration and remained largely unchanged with respect to the Ni:Co ratio. Neutron diffraction measurements of the γ and γ′ lattice parameters revealed that the lattice misfit in all of the alloys was positive and increased with Ti concentration (i.e. lower Al:Ti ratio) regardless of the concentration of Cr; or the ratio of Ni:Co. Importantly; alloys with a Ni:Co ratio of 1:1; were found to have consistently greater lattice misfits than alloys with Ni:Co ratios of either 1:3 or 3:1. The measured lattice misfits were found to be strongly correlated with the Vickers hardness of the alloys; suggesting that lattice misfit plays a key role in the strengthening of γ-γ′ alloys of this type. © 2016 Elsevier B.V;
D O I
暂无
中图分类号
学科分类号
摘要
Journal article (JA)
引用
收藏
相关论文
共 50 条
  • [1] The microstructure and hardness of Ni-Co-Al-Ti-Cr quinary alloys
    Christofidou, K. A.
    Jones, N. G.
    Pickering, E. J.
    Flacau, R.
    Hardy, M. C.
    Stone, H. J.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 688 : 542 - 552
  • [2] The Oxidation Behaviour of Alloys Based on the Ni-Co-Al-Ti-Cr System
    Christofidou, K. A.
    Jones, N. G.
    Hardy, M. C.
    Stone, H. J.
    [J]. OXIDATION OF METALS, 2016, 85 (3-4): : 443 - 458
  • [3] The effect of Ni:Co ratio on the elemental phase partitioning in γ-γ′ Ni-Co-Al-Ti-Cr alloys
    Llewelyn, S. C. H.
    Christofidou, K. A.
    Araullo-Peters, V. J.
    Jones, N. G.
    Hardy, M. C.
    Marquis, E. A.
    Stone, H. J.
    [J]. ACTA MATERIALIA, 2017, 131 : 296 - 304
  • [4] Influence of Ni:Co ratio and temperature on the lattice misfit of ?-?' Ni-Co-Al-Ti-Cr alloys
    Llewelyn, S. C. H.
    Owen, L. R.
    Playford, H. Y.
    Jones, N. G.
    Dye, D.
    Hardy, M. C.
    Stone, H. J.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 937
  • [5] The effect of systematic variation of Ni:Co ratio on the oxidation behaviour of γ-γ′ Ni-Co-Al-Ti-Cr alloys
    Llewelyn, Sioned C. H.
    Chater, Richard J.
    Jones, Nicholas G.
    Hardy, Mark C.
    Stone, Howard J.
    [J]. CORROSION SCIENCE, 2021, 178
  • [6] Microstructure and hardness of Co-Cr-Ti alloys for dental castings
    Slokar, LJ
    Matkovic, T
    Matkovic, P
    [J]. METALURGIJA, 2004, 43 (04): : 273 - 277
  • [7] CONSTITUTION OF NICKEL-RICH QUINARY ALLOYS IN THE SYSTEM NI-FE-CR-TI-AL
    TAYLOR, A
    [J]. TRANSACTIONS OF THE AMERICAN INSTITUTE OF MINING AND METALLURGICAL ENGINEERS, 1957, 209 : 72 - 75
  • [8] Microstructure and phase equilibria in Ni-Al-Cr-Co alloys
    Bursik, Jiri
    Broz, Pavel
    Popovi, Jiri
    [J]. INTERMETALLICS, 2006, 14 (10-11) : 1257 - 1261
  • [9] Microstructure and hardness of nanostructured Al-Fe-Cr-Ti alloys through mechanical alloying
    Zawrah, M
    Shaw, L
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 355 (1-2): : 37 - 49
  • [10] THE INFLUENCE OF SUBSTRATE-TEMPERATURE ON THE MICROSTRUCTURE AND HARDNESS OF VACUUM-PLASMA-SPRAYED CO-NI-CR-AL-SI-ZR-Y AND CO-NI-CR-AL-Y ALLOYS
    GUDMUNDSSON, B
    JACOBSON, BE
    GRUNER, H
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1989, 108 : 105 - 115