Preparation of Attapulgite/g-C3N4/LaCoO3 Composites and Their Performance of Photocatalytic Desulfurization

被引：0

作者：

Zuo S. ^{[1
]}

Wu H. ^{[1
]}

Liu W. ^{[1
]}

Li X. ^{[1
]}

Xu R. ^{[1
]}

Yao C. ^{[1
]}

Wu F. ^{[1
]}

Zhong J. ^{[1
]}

机构：

[1] Advanced Catalysis and Green Manufacturing Collaborative Innovation Center, School of Petrochemical Engineering, Changzhou University, Changzhou, 213164, Jiangsu

来源：

Yao, Chao (yaochao420@163.com) | 1600年 / Chinese Ceramic Society卷 / 48期

关键词：

Attapulgite; Graphitic carbon nitride; Heterojunction; Lanthanum cobalt; Photocatalytic desulfurization;

D O I：

10.14062/j.issn.0454-5648.2020.05.20190673

中图分类号：

学科分类号：

摘要：

ATP/g-C3N4 (graphitic carbon nitride) consisting of g-C3N4 film in-situ growth on the surface of attapulgite (ATP) rod was prepared via a hydrothermal process. Then ATP/g-C3N4 was used as a carrier to uniformly load LaCoO3 nano-particles to prepare Z-scheme ATP/g-C3N4/LaCoO3 heterojunction photocatalysts. The samples obtained were characterized by X-ray diffraction, transmission electron microscopy, ultraviolet-visible, photoluminescence, Brunauer-Emmett-Teller, specific surface area analysis and photo electrochemical analysis. The oxidative removal ability of ATP/g-C3N4/LaCoO3 at different loadings of LaCoO3 to benzothiophene (DBT) in model gasoline was investigated under visible light. The results show that ATP/g-C3N4/LaCoO3 composites dramatically enhance the visible light response, the absorption capacity and the separation of photogenerated electron-hole pairs, compared to ATP/g-C3N4 andLaCoO3. After 150-min irradiation, the desulfurizing rate of 50%-ATP/g-C3N4/LaCoO3 can achieve 85.3%. © 2020, Editorial Department of Journal of the Chinese Ceramic Society. All right reserved.

引用

页码：753 / 760

页数：7

共 24 条

[1] Jang J.G., Lee Y.K., Promotional effect of Ga for Ni2P catalyst on hydrodesulfurization of 4, 6-DMDBT, Appl Catal B: Environ, 250, pp. 181-188, (2019)
[2] Sharifi K., Halladj R., Royaee S.J., Et al., Synthesis of W/HZSM-5 catalyst for simultaneous octane enhancement- desulfurization process of gasoline production, Powder Technol, 338, pp. 638-644, (2018)
[3] Li S.W., Li J.R., Gao Y., Et al., Metal modified heteropolyacid incorporated into porous materials for a highly oxidative desulfurization of DBT under molecular oxygen, Fuel, 197, pp. 551-561, (2017)
[4] Li X.H., Yang X.N., Zhou F., Et al., Construction of novel amphiphilic [Bmin]3PMo12O40/g-C3N4 heterojunction catalyst with outstanding photocatalytic oxidative desulfurization performance under visible light, J Taiwan Inst Chem E, 100, pp. 210-219, (2019)
[5] Li X.Z., Ma S.J., Qian H.M., Et al., Upconversion nanocomposite CeO2: Tm3+/attapulgite intermediated by carbon quantum dots for photocatalytic desulfurization, Powder Technol, 351, pp. 38-45, (2019)
[6] Wang D., Yue L., Guo L., Et al., J Inorg Mater, 28, 10, pp. 1079-1086, (2013)
[7] Chen Y.Q., Shen C., Wang J., Et al., Green synthesis of Ag-TiO2 supported on porous glass with enhanced photocatalytic performance for oxidative desulfurization and removal of dyes under visible light, ACS Sustain Chem Eng, 6, 10, pp. 13276-13286, (2018)
[8] Mamba G., Mishra A.K., Graphitic carbon nitride (g-C3N4) nanocomposites: A new and exciting generation of visible light driven photocatalysts for environmental pollution remediation, Appl Catal B: Environ, 198, pp. 347-377, (2016)
[9] Xu J., Wang Z.P., Zhu Y.F., Enhanced visible-light-driven photocatalytic disinfection performance and organic pollutant degradation activity of porous g-C3N4 nanosheets, ACS Appl Mater Inter, 9, 33, pp. 22727-22735, (2017)
[10] Zhao M., Hui X., Chen Z.G., Et al., Self-assembled synthesis of defect-engineered graphitic carbon nitride nanotubes for efficient conversion of solar energy, Appl Catal B: Environ, 225, pp. 154-161, (2018)

← 1 2 3 →