Detection method of large space optical axis parallelism based on double pentaprism components

被引：0
|
作者：
Zhang L. [1 ]
Qiu W. [2 ]
Zhang K. [1 ]
机构：
[1] Key Laboratory of Optoelectric Measurement and Optical Information Transmission Technology of Ministry of Education, School of Opto-Electronic Engineering, Changchun University of Science and Technology, Changchun
[2] Shanghai Aerospace Control Technology Institute, Shanghai
来源：
Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering | 2018年 / 47卷 / 07期
关键词：
Beam translation; Dynamic optics; Measurement of parallelism; Optical axis;
D O I：
10.3788/IRLA201847.0717005
中图分类号：
学科分类号：
摘要：
The optical axis parallelism was an important parameter for the multi optical axis optoelectronic device. It was very necessary to detect the parallelism. With the gradual increase in the complexity of optoelectronic devices, the distance between optical axes was increasing. The traditional small aperture detection methods could no longer meet the requirements of existing photoelectric devices. In order to detect the parallelism between large space optical axis, a expanding component based on double pentaprism structure was designed to realize the translation of the beam emitted from the collimator, and the error of the expanding component was modified by double wedge structure. The effective aperture of the collimator was extended from 300 mm to 1 200 mm. Mathematical modeling analysis and actual adjustment of the expanding component were carried out and the precision experiment was done. The experimental results of the detecting system show that the beam emitted by the collimator could maintain good parallelism after expanding. The parallelism deviation is within 11″,which could meet the precision requirements of large space optical axis detection. © 2018, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.
引用
收藏
相关论文
共 11 条
  • [1] Huang X., Shen X., Ye L., Development of testing instrument of optical-axial parallelism for multi-axial systems, Journal of Applied Optics, 36, 1, pp. 19-23, (2015)
  • [2] Liu B.Q., Zhao C., Design and realization of a collimator for checking the multi-spectral and multi-axis parallelism, Instrumentation Technology, 5, pp. 5-7, (2015)
  • [3] Liu Y., Zhang X., Gao Y., Study for multi-spectral axes parallelism calibration of photoelectric tracking and aiming system, Journal of Astronautic Metrology and Measurement, 4, pp. 5-8, (2015)
  • [4] Xu H., Su S., Zhang M., Et al., Design and research on detection system for multi-optical axes consistency, Journal of Gun Launch & Control, 4, pp. 78-81, (2013)
  • [5] Xiao Z., Guo X., Xia Y., Et al., Research on detection system of optical sights triaxial parallelism, Optik, 125, 16, pp. 4427-4430, (2014)
  • [6] Zhang L., Cui Q., Zhang K., Multi-axis parallelism measuring system with temperature insensitivity, Journal of Changchun University of Science and Technology (Natural Science Edition), 40, 4, pp. 10-13, (2017)
  • [7] Zhou Z., Ma J., Yu P., Laser/infrared optical system design of common optical path and athermalization, Laser & Optoelectronics Progress, 52, 1, (2015)
  • [8] Shi L., Chen N., Wang B., Et al., Measurement methods for parallelism of optical paths for vehicle-based laser platform, Infrared and Laser Engineering, 45, (2016)
  • [9] Yan Z., Yang J., Xie Z., Optical axis parallelism calibration system of large-scale multi-spectral multi-optical axis, Journal of Applied Optics, 37, 6, pp. 823-828, (2016)
  • [10] Chen Z., Xiao W., Ma D., A method for large distance multi-optical axis parallelism online detection, Acta Optica Sinica, 37, 1, (2017)
12