Optimization of Microstructure and Photoelectric Properties of Perovskite Thin Films

被引：1
|
作者：
Guo X.-B. [1 ]
Yu W. [1 ]
Li J. [1 ]
Jiang Z.-Y. [2 ]
机构：
[1] College of Physics Science and Technology, Hebei University, Baoding, 071002, Hebei
[2] School of Physics and Nuclear Energy Engineering, Beihang University, Beijing
来源：
Guangzi Xuebao/Acta Photonica Sinica | 2017年 / 46卷 / 03期
基金：
中国国家自然科学基金;
关键词：
Perovskite; Photoelectric properties; Solar cells; Solvent annealing; Thin film morphology;
D O I：
10.3788/gzxb20174603.0331004
中图分类号：
学科分类号：
摘要：
Using the pure N, N-dimethyl formamide, pure dimethyl sulfoxide and mixed solvents with different proportion as precursor solvent, respectively, the perovskite thin film samples were prepared. The samples were divided as two sets, one set was processed by thermal annealing in N2 atmosphere, while the other set was processed by solvent annealing in dimethyl sulfoxide vapor atmosphere. The microstructure and optoelectronic properties of the samples were systematically analyzed. The results show that, compared with the thermal annealing, the grain size and uniformity of samples can be significantly improved by solvent annealing, which reduces volume fraction of grain boundaries or interfaces in the films. By solvent annealing and mixed solvents, the absorption and utilization ratio of visible light are enhanced, the morphology is improved, and the crystallization quality is optimized. The increasing of photoluminescence intensity indicates that the defect densities of thin film are reduced. Thin film solar cells were fabricated using the optimized perovskite film as the absorber layer, and a conversion efficiency of 15.7% was achieved. © 2017, Science Press. All right reserved.
引用
收藏
相关论文
共 25 条
  • [1] Dong J., Xu X., Shi J.J., Et al., Suppressing charge recombination in ZnO-nanorod-based perovskite solar cells with atomic layer deposition TiO<sub>2</sub>, Chinese Physics Letters, 32, 7, pp. 210-213, (2015)
  • [2] Shi J.J., Dong W., Xu Y.Z., Et al., Enhanced performance in perovskite organic lead iodide heterojunction solar cells with metal-insulator-semiconductor back contact, Chinese Physics Letters, 30, 12, pp. 64-65, (2013)
  • [3] Lee M.M., Teuscher J., Miyasaka T., Et al., Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites, Science, 338, 6107, pp. 643-647, (2012)
  • [4] Park N.G., Organometal perovskite light absorbers toward a 20% efficiency low-cost solid-state mesoscopic solar cell, Journal of Physical Chemistry Letters, 4, 15, pp. 2423-2429, (2013)
  • [5] Noh J.H., Sang H.I., Jin H.H., Et al., Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells, Nano Letters, 13, 4, pp. 1764-1769, (2013)
  • [6] Jeon N.J., Noh J.H., Yang W.S., Et al., Compositional engineering of perovskite materials for high-performance solar cells, Nature, 517, 7535, pp. 476-480, (2015)
  • [7] Eperon G.E., Burlakov V.M., Docampo P., Et al., Morphological control for high performance, solution-processed planar heterojunction perovskite solar cells, Advanced Functional Materials, 24, 1, pp. 151-157, (2014)
  • [8] Chen Y., Chen T., Dai L., Layer-by-layer growth of CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub>-xCl<sub>x</sub> for highly efficient planar heterojunction perovskite solar cells, Advanced Materials, 27, 6, pp. 1053-1059, (2015)
  • [9] Chiang C.H., Tseng Z.L., Wu C.G., Planar heterojunction perovskite/PC71BM solar cells with enhanced open-circuit voltage via a (2/1)-step spin-coating process, Journal of Materials Chemistry A, 2, 38, pp. 15897-15903, (2014)
  • [10] Wu C.G., Chiang C.H., Tseng Z.L., Et al., High efficiency stable inverted perovskite solar cells without current hysteresis, Energy & Environmental Science, 8, 9, pp. 2725-2733, (2015)
123