Online Calibration for the 6-axis Force Sensor in the Wrist of Industrial Robot Based on Maximum Likelihood Estimation

被引：0
|
作者：
Liu Y. [1 ,2 ]
Li X. [1 ,2 ]
Huang Y. [3 ]
Tang M. [3 ]
Qin D. [3 ]
Nong Z. [3 ]
机构：
[1] School of Computer, Electronics and Information, Guangxi University, Nanning
[2] Guangxi Key Laboratory of Multimedia Communications and Network Technology, The Key Laboratory of Multimedia Communications and Information Processing, Nanning
[3] Sunrise Instruments Co., Ltd., Nanning
来源：
Jiqiren/Robot | 2019年 / 41卷 / 02期
关键词：
Gravity compensation; Industrial robot; Maximum likelihood estimation; Online calibration; Six-axis force sensor;
D O I：
10.13973/j.cnki.robot.180203
中图分类号：
学科分类号：
摘要：
An online calibration algorithm based on the maximum likelihood estimation is proposed to monitor the forces on wrist tools in real-time for industrial robots. Firstly, the 6-axis force sensor is installed in the robot end tools to collect the force, the torque and the motion path of the robot tool in real-time. Then, the gravity coordinate of the tool, the installation angle of the robot, the zero offset of the force sensor and the gravity of the load are calculated according to the force relation of the system while considering the motion vibration interferences at different speeds. Finally, the experiments at different speeds between 10 mm/s~1000 mm/s are conducted, and the consistence of the solution results are analyzed and compared with the results of the least square method. The comparison results show that the maximum likelihood estimation method reduces the average standard deviation of the gravity center from 0.67 mm to 0.23 mm, the standard deviation of the force zeros from 0.73 N to 0.27 N, and the standard deviation of the torque zeros from 0.29 N•m to 0.05 N•m. The experimental results show that the maximum likelihood estimation method can effectively resist the interference caused by high-speed motion of the robot, and can be applied to real-time and online zero calibration of the robot in the case of high-speed motion. © 2019, Science Press. All right reserved.
引用
收藏
页码：216 / 221and231
相关论文
共 13 条
  • [1] Wang T.R., Development of the robot technology, Robot, 39, 4, pp. 385-386, (2017)
  • [2] Tan M., Wang S., Research progress on robotics, Acta Automatica Sinica, 39, 7, pp. 963-972, (2013)
  • [3] Meng M.H., Zhou C.D., Chen L.B., Et al., A review of the research and development of industrial robot, Journal of Shanghai Jiao Tong University, 50, pp. 98-101, (2016)
  • [4] Fujimoto Y., Murakami T., Oboe R., Advanced motion control for next-generation industrial applications, IEEE Transactions on Industrial Electronics, 63, 3, pp. 1886-1887, (2016)
  • [5] Liu Q., Gui J.J., Yang X.W., Et al., Research status and development trends for sensing and control technologies of industrial robot from the viewpoint of patent analysis, Robot, 38, 5, pp. 612-620, (2016)
  • [6] Hou C., Wang Z., Zhao Y.W., Et al., Load adaptive force-free control for the direct teaching of robots, Robot, 39, 4, pp. 439-448, (2017)
  • [7] Li E.C., Li Z.M., Impedance control for positional-controlled robotic manipulators based on force/torque information, Control and Decision, 31, 5, pp. 957-960, (2016)
  • [8] Huang T., Sun L.N., Wang Z.H., Et al., Hybrid force/position control method for robotic polishing based on passive compliance structure, Robot, 39, 6, pp. 776-785, (2017)
  • [9] Zhang L.J., Hu R.Q., Yi W.M., Research on force sensing for the end-load of industrial robot based on a 6-axis force/torque sensor, Acta Automatica Sinica, 43, 3, pp. 439-447, (2017)
  • [10] Zhang G.H., Wang Y.N., A wide range compliance control method in gravity environment based on end force/torque sensor, CAAI Transactions on Intelligent Systems, 10, 5, pp. 675-683, (2015)
12