Aspect ratio effects on the serrated flow dynamic of TiZrHfCuNiBe high entropy metallic glass

被引:18
|
作者
Tong Y. [1 ]
Qiao J.C. [1 ]
Pelletier J.M. [2 ]
Yao Y. [1 ]
机构
[1] School of Mechanics, Civil Engineering and Architecture, Northwestern Polytechnical University, Xi'an
[2] Université de Lyon, MATEIS, UMR CNRS5510, Bat. B. Pascal, INSA-Lyon, F-69621, Villeurbanne cedex
基金
中国国家自然科学基金;
关键词
Aspect-ratio dependent plasticity; High entropy alloy; Metallic glasses; Shear band velocity; Shear-band interaction;
D O I
10.1016/j.intermet.2020.106726
中图分类号
学科分类号
摘要
The effects of aspect ratio on serrated flow dynamic and plasticity of TiZrHfCuNiBe high entropy bulk metallic glass were investigated. With increasing of the aspect ratio, the stress drop time decreases and a ductile-to-brittle transition was observed, which indicates the motion of shear bands will berestricted in the specimens with smaller aspect ratio. Thus, the shear band velocity can be estimated based on the stick-slip dynamics, which enhances with increasing of the aspect ratio, while the critical shear band velocity is almost identical. Therefore, the specimens with larger aspect ratio will achieve the critical shear band velocity faster until fracture. When the aspect ratio is relatively small, the value of shear-band stability index is larger and promotes stable propagation of the shear bands. In addition, the plasticity and serration size are not monotonic correlated. Benefitting from the abundant secondary shear bands and the interactions at various scales, the plastic deformation can be regarded as the self-organized critical state for samples with better plasticity and lower aspect ratio. However, the self-organized critical state will switch to a chaotic state with increasing of the aspect ratio. © 2020 Elsevier Ltd
引用
收藏
相关论文
共 50 条
  • [1] Aspect ratio effects on the serrated flow dynamic of TiZrHfCuNiBe high entropy metallic glass
    Tong, Y.
    Qiao, J. C.
    Pelletier, J. M.
    Yao, Y.
    INTERMETALLICS, 2020, 119
  • [2] Strong metallic glass: TiZrHfCuNiBe high entropy alloy
    Tong, Y.
    Qiao, J. C.
    Pelletier, J. M.
    Yao, Y.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 820
  • [3] Crystallization kinetics of TiZrHfCuNiBe high entropy bulk metallic glass
    Gong, P.
    Yao, K. F.
    Ding, H. Y.
    MATERIALS LETTERS, 2015, 156 : 146 - 149
  • [4] A senary TiZrHfCuNiBe high entropy bulk metallic glass with large glass-forming ability
    Ding, H. Y.
    Shao, Y.
    Gong, P.
    Li, J. F.
    Yao, K. F.
    MATERIALS LETTERS, 2014, 125 : 151 - 153
  • [5] Rate-dependent plastic deformation of TiZrHfCuNiBe high entropy bulk metallic glass
    Tong, Y.
    Qiao, J. C.
    Pelletier, J. M.
    Yao, Y.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 785 : 542 - 552
  • [6] Rate dependence of serrated flow in a metallic glass
    Jiang, WH
    Atzmon, M
    JOURNAL OF MATERIALS RESEARCH, 2003, 18 (04) : 755 - 757
  • [7] Rate dependence of serrated flow in a metallic glass
    W. H. Jiang
    M. Atzmon
    Journal of Materials Research, 2003, 18 : 755 - 757
  • [8] Dynamics of serrated flow in a bulk metallic glass
    Ren, J. L.
    Chen, C.
    Wang, G.
    Mattern, N.
    Eckert, J.
    AIP ADVANCES, 2011, 1 (03):
  • [9] Elastocapillary bundling of high aspect-ratio metallic glass nanowires
    Hu, Zhonglue
    Uzun, Ceren
    Dong, Ziye
    Li, Wei
    Bernussi, Ayrton A.
    Kumar, Golden
    APPLIED PHYSICS LETTERS, 2017, 111 (02)
  • [10] Effects of strain rates on shear band and serrated flow in a bulk metallic glass
    Li, Peiyou
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2018, 484 : 30 - 35