Optimization and realization of SWIPT relay channel transmission rate based on rateless code

被引:0
|
作者
Lei W. [1 ]
Dong M. [1 ]
机构
[1] School of Communication and Information Engineering, Chongqing University of Posts and Telecommunications, Chongqing
来源
基金
中国国家自然科学基金;
关键词
Modulation; Raptor code; Rateles code; Relay; Simultaneous wireless information and power transfer;
D O I
10.11959/j.issn.1000-436x.2019092
中图分类号
学科分类号
摘要
The optimization of the transmission rate and implementation of the simultaneous wireless information and power transfer in a relay system were studied. In a three-node two-hop system, the decode-and-forward protocol was employed by the relay node. One transmission period was divided into two phases. The first phase was the simultaneous transmission of the information and energy from the source to the relay. The received signal at the relay node was split to two parts. One part was used for information decoding, and the other was converted into energy for information forwarding in the second phase. In the second phase, the information was forwarded according to the decode-and-forward protocol by the relay. The power splitting factor was optimized to minimize the total time of the two hops for the transmission of a certain amount of information when the durations of the two hops were unequal. Furthermore, Raptor codes were combined with different modulation modes to realize different transmission rates on the two hops for the efficient utilization of the different channel capacities in the two hops. The selection mechanism of the codeword length of Raptor codes and modulation mode was given. The simulation proves that the two hops with unequal durations can achieve a higher throughput, and the capacity of the relay channel can be efficiently used by employing Raptor codes, and an efficient and reliable transmission is realized. © 2019, Editorial Board of Journal on Communications. All right reserved.
引用
下载
收藏
页码:98 / 107
页数:9
相关论文
共 14 条
  • [1] Zhou X., Zhang R., Ho C.K., Wireless information and power transfer: architecture design and rate-energy tradeoff, IEEE Transaction on Communication, 61, 11, pp. 4754-4767, (2013)
  • [2] Bi S.Z., Ho C.K., Zhang R., Wireless powered communication: opportunities and challenges, IEEE Communications Magazine, 53, 4, pp. 117-125, (2015)
  • [3] Liu T., Wang X., Zheng L., A cooperative SWIPT scheme for wireless powered sensor networks, IEEE Transactions on Communications, 65, 6, pp. 2740-2752, (2017)
  • [4] Lee H., Song C., Choi S., Et al., Outage probability analysis and power splitting design for SWIPT relaying systems with direct link, IEEE Communications Letters, 21, 3, pp. 648-651, (2017)
  • [5] Van N., Hasan S., Gui X., Et al., Three-step two-way decode and forward relay with energy harvesting, IEEE Communications Letters, 21, 4, pp. 857-860, (2017)
  • [6] Wang Z., Li Y., Ye Y., Et al., Dynamic power splitting scheme for non-linear EH relaying networks: perfect and imperfect CSI, 2017 IEEE 86th Vehicular Technology Conference (VTC-Fall), pp. 1-5, (2017)
  • [7] Rabie K., Adebisi B., Alouini M., Wireless power transfer in cooperative DF relaying networks with log-normal fading, 2016 IEEE Global Communications Conference (GLOBECOM), pp. 1-6, (2016)
  • [8] Wang D., Li Y.Z., Ye Y.H., Et al., Joint time allocation and power splitting schemes for DF energy harvesting relaying networks, 2017 IEEE 86th Vehicular Technology Conference (VTC-Fall), pp. 1-5, (2017)
  • [9] Di X.F., Xiong K., Fan P.Y., Et al., Simultaneous wireless information and power transfer in cooperative relay networks with rateless codes, IEEE Transactions on Vehicular Technology, 66, 4, pp. 2981-2996, (2017)
  • [10] Corless R.M., Gonnet G.H., Hare D.E.G., Et al., On the Lambert W function, Computational Mathematics, 5, 1, pp. 329-359, (1996)