Heat transfer mechanism and influencing factors in spray cooling

被引：6
|
作者：
Wang Y. [1 ]
Liu M. [2 ]
Liu D. [2 ]
Wang L. [1 ]
Guo H. [1 ]
机构：
[1] The 38th Institute, China Electronics Technology Group Corporation
[2] Department of Thermal Science and Energy Engineering, University of Science and Technology of China
来源：
Qiangjiguang Yu Lizishu/High Power Laser and Particle Beams | 2011年 / 23卷 / 09期
关键词：
Critical heat flux; Heat transfer; Heat transfer mechanism; Spray cooling;
D O I：
10.3788/HPLPB20112309.2277
中图分类号：
学科分类号：
摘要：
Based on the research results at home and abroad, this paper provides a brief summarization and comments on the heat transfer characteristics, mechanisms, strengthening way and affecting parameters of spray cooling. Some theoretical models for critical heat flux are presented. And the development direction of spray cooling is proposed according to the cooling requirements of high power lasers.
引用
收藏
页码：2277 / 2281
页数：4
相关论文
共 15 条
  • [1] Wu D., Gao S.-X., Lu W., Et al., Design of high efficient copper micro-channels cooler for diode laser, High Power Laser and Particle Beams, 16, 7, pp. 840-842, (2004)
  • [2] Wang Y., Liu M., Liu D., Et al., Experiment study on spray cooling for high-power laser, High Power Laser and Particle Beams, 21, 12, pp. 1761-1766, (2009)
  • [3] Si C., Shao S., Tian C., Et al., Spray cooling technology for high-power laser, High Power Laser and Particle Beams, 22, 12, pp. 2789-2793, (2010)
  • [4] Chow L.C., Sehembey M.S., Pais M.R., High heat flux spray cooling, Annul Rev Heat Transfer, 129, 8, pp. 291-318, (1997)
  • [5] Wang Y., Studying the heat transfer performance in the non-boiling regime of spray cooling, pp. 55-69, (2010)
  • [6] Rini D.P., Chen R.H., Chow L.C., Bubble behavior and nucleate boiling heat transfer in saturated FC-72 spray cooling, Journal of Heat Transfer, 124, 1, pp. 63-72, (2002)
  • [7] Wang Y., Liu M., Liu D., Et al., Numerical study on the effect of secondary nucleation on spray cooling, Journal of University of Science and Technology of China, 10, 4, pp. 391-397, (2009)
  • [8] Kim J., Spray cooling heat transfer: the state of the art, Int J Heat Fluid Flow, 28, 11, pp. 753-767, (2007)
  • [9] Chen R.H., Chow L.C., Navedo J.E., Effects of spray characteristics on critical heat flux in subcooled water spray cooling, International Journal of Heat and Mass Transfer, 45, 9, pp. 4033-4043, (2002)
  • [10] Chen R.H., Chow L.C., Navedo J.E., Optimal spray characteristic in water spray cooling, International Journal of Heat and Mass Transfer, 47, 9, pp. 5095-5099, (2004)
12