Method and application of mining intensity evaluation model in large mining height working face

被引：0
|
作者：
Fan Z. [1 ,2 ]
Qi Q. [1 ]
Wang J. [2 ]
机构：
[1] Coal Mining Branch, China Coal Research Institute, Beijing
[2] College of Resources & Safety Engineering, China University of Mining & Technology (Beijing), Beijing
来源：
Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering | 2018年 / 35卷 / 02期
关键词：
Attribute recognition; Entropy; Large mining height; Step by step principle; Ultimate mining;
D O I：
10.13545/j.cnki.jmse.2018.02.016
中图分类号：
学科分类号：
摘要：
Based on the critical "size effect" analysis of single factor or multifactor coupling in large mining height working face, the definition and connotation of ultimate mining were put forward. The key issue that the large mining height working face could realize safe, efficient and good economic benefits was determined by scientific quantification of thick seam mining intensity. Then the mining intensity evaluation model based on entropy was set up and realized horizontal contrast among large mining height working face with different occurrence conditions. The attribute recognition method effectively solved the adjacent interval ordered partition problem of evaluation index about geological and mining condition. Because of the evaluation index easy to obtain, simple calculation process, and objective evaluation result, this model provided a more scientific approach to mining intensity classification evaluation of in large mining height working face. © 2018, Editorial Board of Journal of Mining & Safety Engineering. All right reserved.
引用
收藏
页码：347 / 351and358
相关论文
共 11 条
  • [1] Yang P., Liu C., Wu F., Breakage and falling of a high coal wall in a thick mined seam, Journal of China University of Mining & Technology, 41, 3, pp. 371-376, (2012)
  • [2] Yin X., Yan S., An Y., Characters of the rib spalling in fully mechanized caving face with great ming height, Journal of Mining & Safety Engineering, 25, 2, pp. 222-225, (2008)
  • [3] Fan L., On coal mining intensity and geo-hazard in Yulin-Shenmu-Fugu mine area, China Coal, 40, 5, pp. 52-55, (2014)
  • [4] Wang D., Xie G., Meng X., Prediction research on output and work efficiency of fully mechanized sub-level caving face based on artificial neural network, Journal of Liaoning Technical University, 22, 6, pp. 851-853, (2003)
  • [5] Li W., Ma L., Meng W., Comprehensive evaluation model for the safety of fully mechanized mining face based on unascertained measure and AHM, Journal of China Coal Society, 32, 6, pp. 612-616, (2007)
  • [6] Xing C., Wang S., Cui Y., A multi-dimensional grey state model on parameter system of fully mechanized coal faces, Journal of Liaoning Technical University, 25, 6, pp. 808-811, (2006)
  • [7] Guo C., Cavability identification of top coal in fully mechanized caving through unasceratined measure approach and its engineering application, Journal of China Coal Society, 37, pp. 293-300, (2012)
  • [8] Li J., Li Y., Li D., Fuzzy optimization model and appli-cation based on improved AHP for indexes weight calculation, Journal of North China Institute of Water Conservancy and Hydroelectric Power, 23, 2, pp. 4-6, (2002)
  • [9] Yan K., Wu J., Zhang J., Et al., Multi grey synthetic evaluation on pavement condition of asphalt pavement, Bulletin of Science and Technology, 25, 1, pp. 98-102, (2009)
  • [10] Zhang X., Liang C., Liu H., Application of attribute recognition model based on coefficient of entropy to comprehensive evaluation of groundwater quality, Journal of Sichuan University(Engineering Science Edition), 37, 3, pp. 28-31, (2005)
12