Fault-tolerant measurement mechanism and calibration experimental study of pre-stressed parallel six-axis force sensor

被引：0
|
作者：
Yao J. [1 ,2 ]
Cui P. [1 ]
Zhu J. [1 ]
Xu Y. [1 ,2 ]
Zhao Y. [1 ,2 ]
机构：
[1] Parallel Robot and Mechatronic System Laboratory of Hebei Province, Yanshan University, Qinhuangdao
[2] Key Laboratory of Advanced Forging & Stamping Technology and Science, Ministry of Education of China, Yanshan University, Qinhuangdao
来源：
Zhao, Yongsheng (yszhao@ysu.edu.cn) | 1600年 / Chinese Mechanical Engineering Society卷 / 52期
关键词：
Calibration experiment; Fault-tolerant; Parallel; Pre-stressed; Six-axis force sensor;
D O I：
10.3901/JME.2016.08.058
中图分类号：
学科分类号：
摘要：
For a pre-stressed six-axis force sensor, the theoretical analysis and experimental study of fault-tolerant measurement mechanism are carried out. The fault-tolerance characteristic of pre-stressed parallel six-axis force sensor is introduced, with the screw theory and deformation coordination, the mathematic models including fault-free mathematic model and signal fault mathematic model are established, respectively. Moreover, the fault-tolerant measurement principle is revealed. The static calibration algorithm of the pre-stressed parallel six axis force sensor is analyzed, a fault-tolerant calibration method is proposed and the static calibration includes unidirection loading, bidirectional combined loading and sectional loading of the sensor is carried out including the models with and without signal fault. Through analyzing the experimental data, the linear error of the sensor is drawn under different working conditions. The research lays a theoretical and experimental foundation for the application of the fault-tolerant six-axis force sensor. © 2016 Journal of Mechanical Engineering.
引用
收藏
页码：58 / 66
页数：8
相关论文
共 17 条
  • [1] Zhang C., Study on six-degree-of-freedom simulation for docking, Aerospace Control, 1, pp. 70-74, (1999)
  • [2] Zhang X., Feng N., Zhang W., Experimental research on the abs performance based on the wheel forces mea sured by roadway test, China Mechanical Engineering, 19, 6, pp. 751-752, (2008)
  • [3] Merlet J.P., Parallel Robots, (2006)
  • [4] Li M., Liu J., Qin L., Et al., Research of parallel piezoelectric six-axis force/torque sensor's static characteristics, Journal of Mechanical Engineering, 50, 6, pp. 1-7, (2014)
  • [5] Zhao L., Liu W., Gong Y., Pre-stressed six-axis force/torque sensor based on Stewart platform, Optics and Precision Engineering, 19, 12, pp. 2954-2962, (2011)
  • [6] Dwarrakanath T.A., Dasgupta B., Mruthyunjaya T.S., Design and development of Stewart platform based force-torque sensor, Mechatronics, 11, 7, pp. 793-809, (2001)
  • [7] Kang C.G., Closed-form force sensing of a 6-axis force transducer based on the Stewart platform, Sensors and Actuators A, 90, 1, pp. 31-37, (2001)
  • [8] Jin Z., Gao F., Zhao X., Calibration experiment and analysis for a 6-DOF controller with parallel structure, Chinese Journal of Mechanical Engineering, 41, 8, pp. 103-107, (2005)
  • [9] Wang X., Yin R., Six-axis force/torque sensor based on Stewart platform, Chinese Journal of Mechanical Engineering, 44, 12, pp. 118-122, (2008)
  • [10] Jia Z., Li Y., Zhang J., Et al., Axial piezoelectric 6-component force/torque sensor based on parallel structure, Journal of Mechanical Engineering, 46, 11, pp. 62-68, (2010)
12