Influences of Process Parameters of Laser Transmission Welding of Polycarbonate on Contact Thermal Conductivity

被引：0
|
作者：
Liu H. [1 ]
Jiang N. [1 ]
Hao Y. [1 ]
Wang C. [1 ]
机构：
[1] School of Mechanical and Electric Engineering, Soochow University, Suzhou, 215021, Jiangsu
来源：
Zhongguo Jiguang/Chinese Journal of Lasers | 2017年 / 44卷 / 12期
关键词：
Contact thermal conductivity; Laser technique; Laser transmission welding; Response surface method; Thermal contact model; Volume heat source;
D O I：
10.3788/CJL201744.1202002
中图分类号：
学科分类号：
摘要：
Based on the established three-dimensional rough surface model, the transient finite element model and the thermal contact model, the effects of laser power, welding speed and clamp pressure on the contact thermal conductivity of laser transmission welding of polycarbonate are studied, and the comparison between simulated and experimental results is also conducted. The study results show that, with the increase of the welding speed, the contact thermal conductivity decreases and the decrease becomes slow. With the increase of laser power, the contact thermal conductivity increases and the increase becomes slow. When the clamp pressure is within the range of 0-0.25 MPa, the contact thermal conductivity increases with the increase of the laser power. A relatively high contact thermal conductivity can be achieved when the conditions of high laser power, low welding speed and high clamp pressure are satisfied. The contact thermal conductivity can be well predicted based on the built mathematical models. © 2017, Chinese Lasers Press. All right reserved.
引用
收藏
相关论文
共 16 条
  • [1] Zheng J., Li Y.Z., Wang L., Et al., An improved thermal contact resistance model for pressed contacts and its application analysis of bonded joints, Cryogenics, 61, 5, pp. 133-142, (2014)
  • [2] Ji C.C., Zhu H., Jiang W., Fractal prediction model of thermal contact conductance of rough surfaces, Chinese Journal of Mechanical Engineering, 26, 1, pp. 128-136, (2013)
  • [3] Wang Q., Jiao J., Wang F., Et al., Finite element analysis of CFRP and stainless steel laser welding, Laser Technology, 40, 6, pp. 853-859, (2016)
  • [4] Liu H., Guo Z., Wang S., Et al., Research on thermal contact conductance using multi-piece heat sink to hold crystal and dissipate heat in solid-state laser, Chinese J Lasers, 38, 5, (2011)
  • [5] Jeng Y.R., Chen J.T., Cheng C.Y., Thermal contact conductance of coated surfaces, Wear, 260, 1-2, pp. 159-167, (2006)
  • [6] Zhang X., Cong P.Z., Fujii M., A study on thermal contact resistance at the interface of two solids, International Journal of Thermophysics, 27, 3, pp. 880-895, (2006)
  • [7] Wei H., Wang C., Technics and performance research of laser transmission welding polycarbonate plastics, Chinese J Lasers, 38, 11, (2011)
  • [8] Tan Y., Zhu Y., Wang C., Research on the properties of laser transmission welding of transparent polypropylene, Chinese J Lasers, 40, 12, (2013)
  • [9] Wang C., Shen X., Techniques and performance research on laser transmission welding of polypropylene plastics, Laser & Optoelectronics Progress, 52, 2, (2015)
  • [10] Xu X.F., Parkinson A., Bates P.J., Et al., Effect of part thickness, glass fiber and crystallinity on light scattering during laser transmission welding of thermoplastics, Optics & Laser Technology, 75, 6, pp. 123-131, (2015)
12