Study on Single Valve Turn-off Test Method of Controllable Line-commutated Converter

被引:0
|
作者
He, Zhiyuan [1 ]
Gao, Chong [1 ]
Zhang, Juanjuan [1 ]
Sheng, Caiwang [1 ]
Wang, Chenghao [1 ]
Wang, Purui [1 ]
机构
[1] State Key Laboratory of Advanced Power Transmission Technology, China Electric Power Research Institute, Changping, Beijing,102200, China
基金
国家重点研发计划;
关键词
Computer debugging - Design for testability - Electric fault location - Insulated gate bipolar transistors (IGBT) - Integrated circuit design - Solar power generation - Stress analysis;
D O I
10.13334/j.0258-8013.pcsee.232501
中图分类号
学科分类号
摘要
The controllable line-commutated converter (CLCC) not only inherits the advantages of large capacity, low loss, and high overload capacity of traditional line commutated converter (LCC), but also has the ability to shut off the bridge arm actively, which can fundamentally prevent commutation failure. In June 2023, the CLCC valves were successfully applied in the ±500 kV/1 200 A Genan DC renovation project, and since operation the operating characteristics have been good. The ability of turning off high current for the CLCC valve determines whether it can successfully withstand commutation failure in the event of AC faults. Therefore, it is necessary to carry out a single valve large current turn-off test to verify the synchronous turn-on and turn-off consistency and the transient electrical stress tolerance level of more than 100 controllable devices in the CLCC valves under AC failure. Based on the principle of forced commutation process in the case of AC failure of CLCC valves, this paper firstly analyzes the key stress of IGBT sub-valve during the main-auxiliary branch transfer and bridge arm forced shutdown process, and extracts the key stress parameters in each stage. Secondly, using hundred-millisecond back-off and isolation control method of the hundred-kV supplementary AC voltage source and LC resonant current source, a high current turn-off test device for single CLCC valve is developed, the analytical relationship between key stress parameters and test circuit parameters is established, and the parameters of the test device are designed. A large current turn-off test platform for a single ±500 kV/1 200 A CLCC valve was built to evaluate the working capability of the CLCC valves, and the equivalence and correctness of this method were verified through comparison between experiments and simulation. The method can also provide theoretical guidance for the subsequent single valve turn-off test of CLCC valves with different voltage levels. © 2024 Chin.Soc.for Elec.Eng.
引用
收藏
页码:8248 / 8257
相关论文
共 33 条
  • [1] Low Voltage Test Method for Controllable Line-commutated Converter
    Zhang, Min
    Yang, Jun
    Du, Zhaoxin
    Liu, Hong
    Wang, Yi
    Li, Tingting
    Gaodianya Jishu/High Voltage Engineering, 2024, 50 (08): : 3655 - 3664
  • [2] Study on Working Principle and Electrical Modeling of Energy Consumption Mode of Controllable Line-commutated Converter
    Zhang, Jing
    Gao, Chong
    Yang, Jun
    Tang, Guangfu
    Wang, Chenghao
    Sheng, Caiwang
    Gaodianya Jishu/High Voltage Engineering, 2024, 50 (07): : 2784 - 2793
  • [3] Control Strategies for Mutually Commutated Converter Systems without Cycloconverter Turn-off Capability
    Meier, Stephan
    Norrga, Staffan
    Nee, Hans-Peter
    2008 IEEE POWER ELECTRONICS SPECIALISTS CONFERENCE, VOLS 1-10, 2008, : 1344 - 1350
  • [4] A study on Overvoltage and Protection of Line-Commutated Converter HVDC Metallic Return Cable
    Yoo, Yeuntae
    Jung, Seungmin
    Jang, Gilsoo
    IFAC PAPERSONLINE, 2015, 48 (30): : 369 - 372
  • [5] A STUDY OF NONLINEAR HARMONIC INTERACTION BETWEEN A SINGLE-PHASE LINE-COMMUTATED CONVERTER AND A POWER-SYSTEM
    JALALI, SG
    LASSETER, RH
    IEEE TRANSACTIONS ON POWER DELIVERY, 1994, 9 (03) : 1616 - 1624
  • [6] Research on the Mechanism of the Voltage Drop Affecting the Reliable Turn-off of the Thyristor in Converter Valve
    Zhao C.
    Ye Y.
    Zhan R.
    Guo C.
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2022, 42 (12): : 4505 - 4515
  • [7] A Novel Ultrafast Turn-Off Failure Detection Method of Integrated Gate Commutated Thyristor for VSC Application
    Bai, Ruihang
    Zhao, Biao
    Yang, Chen
    Chen, Zhengyu
    Liu, Jiapeng
    Zhang, Liang
    Wu, Jinpeng
    Yu, Zhanqing
    Zeng, Rong
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 2023, 38 (03) : 2839 - 2843
  • [8] One Adaptive Turn-off Method for PFC Converter with Voltage Spike Limitation
    Wu, Qunfang
    Wang, Qin
    Xiao, Lan
    Xu, Jialin
    Li, Hongxu
    APEC 2016 31ST ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION, 2016, : 1657 - 1662
  • [9] Frequency Domain Admittance Model of Line-Commutated Converter Based on Single-Side Modulated State Function
    Wang, Juanjuan
    Liu, Yuekun
    Fu, Chuang
    Wang, Zehao
    Feng, Junjie
    Li, Huan
    Yu, Zhenxiao
    Mo, Ze
    Zhou, Shengyu
    IEEE TRANSACTIONS ON POWER DELIVERY, 2024, 39 (02) : 845 - 858
  • [10] Thyristor Turn-off Time Under Actual Operational Condition in UHVDC Project Converter Valve
    Sheng C.
    Zhang J.
    Liu J.
    Li T.
    Yang J.
    Sun L.
    Dianwang Jishu/Power System Technology, 2022, 46 (08): : 3076 - 3083