Experimental research on the influence of gas on coal burst tendency

被引：0

作者：

Zhang G. ^{[1
,2
,3
]}

Ouyang Z. ^{[1
,2
,3
]}

Qi Q. ^{[2
,3
]}

Li H. ^{[1
,2
,3
]}

Deng Z. ^{[1
,2
,3
]}

Jiang J. ^{[1
,2
,3
]}

机构：

[1] Mine Safety Technology Branch, China Coal Research Institute, Beijing

[2] State Key Laboratory of Coal Mining and Clean Utilization(China Coal Research Institute), Beijing

[3] China Coal Research Institute, Beijing

来源：

Ouyang, Zhenhua (oyzhua@163.com) | 1600年 / China Coal Society卷 / 42期

关键词：

Burst tendency; Energy dissipation; Failure formation; Gas;

D O I：

10.13225/j.cnki.jccs.2017.0681

中图分类号：

学科分类号：

摘要：

In order to study the influence of gas on coal burst tendency, the burst tendency index of coal samples was measured under different gas pressures, the energy accumulation and dissipation of coal samples under multi-stage cyclic loading and strain loading were analyzed. The results show that under the combined action of pore pressure and adsorbed gas, the burst tendency index of coal sample changes from strong to weak or weak to direct; the gas reduces the strength of the coal sample, and the dissipation energy due to the damage and plastic deformation increase during the multistage cycling process, the ability of coal samples to store elastic strain energy decreases, when the coal sample is completely destroyed, the surplus energy decreases, thus, the gas weakens the burst performance of coal. With the increase of gas pressure, the energy drop coefficient becomes larger, it indicates that the failure form of coal samples changes from brittle to brittle-plastic. Based on the influence of gas on burst tendency and the form of failure of coal, when measuring the burst tendency and evaluating the rock burst risk of gas containing coal seams, the influence of gas on the burst performance of coal seams should be taken into a full consideration. © 2017, Editorial Office of Journal of China Coal Society. All right reserved.

引用

页码：3159 / 3165

页数：6

共 16 条

[1] Qi Q., Liu T., Shi Y., Mechanism of frction sliding destability of rock burst, Ground Preesure and Strata Control, 13, 4, pp. 174-177, (1995)
[2] Li Y., Preliminary application of rock burst mechanism, Journal of China Mining Institute, 3, pp. 37-43, (1985)
[3] Bieniawski Z.T., Mechanism of brittle fracture of rocks, International Journal of Rock Mechanics and Mining Sciences, 4, pp. 395-430, (1977)
[4] Dou L., Lu C., Mou Z., Et al., Rock burst tendency of coal-rock combinations sample, Journal of Mining & Safety Engineering, 23, 1, pp. 43-46, (2006)
[5] Zhang M., Song W., Pan Y., Study on water pouring into coal seam to prevent rock-burst, China Safety Science Journal, 13, 10, (2003)
[6] Zhao Y., Jiang Y., Zhang Y., The relationship between bump-prone property and microstructure characteristics of coal, Journal of China Coal Society, 32, 1, pp. 64-68, (2007)
[7] Su C., Experimental study on the effect of crystal size and specimen length on the burst tendency, Chinese Journal of Rock Mechanics and Engineering, 23, 22, pp. 3750-3753, (2004)
[8] Zhao T., Yin Y., Tan Y., Et al., Bursting liabi lity of coal research of heterogeneous coal based on particle flow microscopic test, Journal of China Coal Society, 39, 2, pp. 280-285, (2014)
[9] Li H., Jiang C., Jiang Y., Et al., Evaluation method and application of coal burst performance under the effect of loading rate, Journal of China University of Mining & Technology, 40, 12, pp. 2763-2771, (2015)
[10] Li X., Kang L., Li H., Et al., Three-dimensional numerical simulation of bust-prone experiments about coal-rock combination, Journal of China Coal Society, 36, 12, pp. 2064-2067, (2011)

← 1 2 →