Interaction between shock wave and a liquid droplet

被引:0
|
作者
Liu G. [1 ,2 ]
Hou H. [1 ]
Zhu X. [1 ]
机构
[1] Department of Naval Architecture Engineering, Naval University of Engineering, Wuhan
[2] Unit 92941 of Chinese People's Liberation Army, Huludao
来源
关键词
Blast wave; Liquid droplet breakup; Pressure wave; Reflected blast wave; Transmitted wave; Vortex pair;
D O I
10.13465/j.cnki.jvs.2017.13.007
中图分类号
学科分类号
摘要
Atomizing liquid droplets under the action of blast wave is used in industry and practice, but there are few studies on the interaction between strong blast wave and atomized liquid droplets, as this interaction has a positive effect on avoiding explosion shock of ship cabins. Here, the finite element method was used to simulate pressure change of strong shock wave acting on a single liquid droplet in a 2-dimensional space, and shape and location changes of the droplet. The breakup characteristics of the droplet were analyzed due to different explosive masses and explosion distances. The results showed that there are two typical modes of liquid droplet breakup, they are obvious different; the explosion distance and explosive mass have a decisive effect on the propagation speed of blast wave, and affect the breakup mode of droplet; the reflected blast wave and the transmitted wave in the model of high Mach number are obviously different from those in the model of low Mach number; the local low pressure area diffracted by vortex pair of high Mach number is much broader than that diffracted by vortex pair of low Mach number; the interaction process for high Mach number is more severe and lasts less time; compared with the process of blast shock wave propagation, the process of liquid droplet deforming has an obvious hysteresis, the former is more fast and the aerodynamic force produced continuously affects the shape change of the liquid droplet. © 2017, Editorial Office of Journal of Vibration and Shock. All right reserved.
引用
收藏
页码:45 / 52
页数:7
相关论文
共 25 条
  • [1] Hou H., Zhu X., Mei Z., Study on the blast load and failure mode of ship structure subject to internal explosion, Explosion and Shock Waves, 27, 2, pp. 151-158, (2007)
  • [2] Zhu X., Zhang Z., Liu R., Et al., Experimental study on the expolsion resistance on cabin near shipboard of surface warship subjected to underwater contact explosion, Explosion and Shock Waves, 24, 2, pp. 133-139, (2004)
  • [3] Xu D., Gai J., Wang S., Deformation and failure of layered defense models subjected to contact explosive load, Explosion and Shock Waves, 28, 5, pp. 476-480, (2008)
  • [4] Radford D.D., Mcshane G.J., Deshpande V.S., Et al., The response of clamped sandwich plates with metallic foam cores to simulated blast loading, International Journal of Solids & Structures, 43, 7-8, pp. 2243-2259, (2006)
  • [5] Fleck N.A., Deshpande V.S., The resistance of clamped sandwich beams to shock loading, Journal of Applied Mechanics, 71, 3, pp. 386-401, (2004)
  • [6] Zhang X., Wang Z., Zhao L., Dynamic response of a clamped square sandwich plate with honeycomb core subjected to blast loading, Journal of Mechanical Strength, 32, 3, pp. 404-409, (2010)
  • [7] Hou H., Zhu X., Gu M., Study on failure mode of stiffened plate and optimized design of structure subjected to blast load, Explosion and Shock Waves, 27, 1, pp. 26-33, (2007)
  • [8] Mei Z., Deng B., Ren C., Et al., The analysis of dynamical characteristics of energy absorbing for double layers bulkhead subjected to blast loading, The 7th International Conference on Shock & Impact Loads on Structures, pp. 401-408, (2007)
  • [9] Fan Z., Shen Z., Ma H., Et al., Experimental study on attenuation of underwater shock wave bu air interlayer, Journal of University of Science and Technology of China, 37, 10, pp. 1306-1311, (2007)
  • [10] Yao X., Yang W., Chu W., Et al., Research on performance of the underwater air buffer weakening shock wave, Chinese Journal of High Pressure Physics, 25, 2, pp. 165-172, (2011)