Effect of Semi-solid Isothermal Heat Treatment on Microstructure of 7075 Alloy

被引：1
|
作者：
Zhu C. [1 ]
Luo Z.-M. [1 ]
Wang R. [1 ]
Zhao Z.-H. [1 ]
机构：
[1] School of Materials Science & Engineering, Northeastern University, Shenyang
来源：
Zhao, Zhi-Hao (zzhepm@126.com) | 1723年 / Northeast University卷 / 39期
关键词：
7075; alloy; Isothermal heat treatment; Microstructure; Non dendrites; Semi-solid;
D O I：
10.12068/j.issn.1005-3026.2018.12.010
中图分类号：
学科分类号：
摘要：
Microstructure evolution of 7075 alloy from dendrite to non-dendrite during semi-solid isothermal heat treatment was studied and the difference of the phase constituents between as-cast and semi-solid microstructure was also investigated. The results show that the formation of non-dendritic structures has three stages: the disappearance of branching characteristics, flattening grain boundaries, arcuating grain boundary and grain growth. The disappearance of branching characteristics is caused by the melt of the low-melting-temperature phases located in the secondary dendrite arm: the agglomeration of part liquid phase wrapped inside the solid particles, some liquid phase flowed from the dendrite channels to the grain boundaries and the other liquid phase lapped together to form new solid particles. The phase constituents of both as-cast and semi-solid microstructures in 7075 alloys are all α-Al, η(MgZn 2 ) and θ(Al 2 Cu). © 2018, Editorial Department of Journal of Northeastern University. All right reserved.
引用
收藏
页码：1723 / 1726
页数：3
相关论文
共 11 条
  • [1] Wang N., Zhou Z.M., Lu G.M., Microstructural evolution of 6061 alloy during isothermal heat treatment, Journal of Materials Science & Technology, 27, 1, pp. 8-14, (2011)
  • [2] Zhang Q.Q., Cao Z.Y., Zhang Y.F., Et al., Effect of compression ratio on the microstructure evolution of semisolid AZ91D alloy, Journal of Materials Processing Technology, 184, 1, pp. 195-200, (2007)
  • [3] Atkinson H.V., Liu D., Microstructural coarsening of semi-solid aluminium alloys, Materials Science & Engineering A, 496, 1-2, pp. 439-446, (2008)
  • [4] Wang C.C., Li Y.Y., Chen W.P., Et al., Microstructure evolution of semi-solid 2024 alloy during two-step reheating process, Transactions of Nonferrous Metals Society of China, 18, 4, pp. 784-788, (2008)
  • [5] Wei L., Yang D., Quan G., Et al., Microstructure evolution of semisolid Mg-2Zn-0.5Y alloy during isothermal heat treatment, Rare Metal Materials & Engineering, 45, 8, pp. 1967-1972, (2016)
  • [6] Li Y.-D., Hao Y., Yan F.-Y., Et al., Structural evolution of AZ91D magnesium alloy during semi-solid isothermal heat treatment, The Chinese Journal of Nonferrous Metals, 11, 4, pp. 571-575, (2001)
  • [7] Yang M.-B., Dai B., Zhao W.-L., Research and development of nondendritic structure alloy slurry producing using semi-solid isothermal treatment, Materials Review, 18, pp. 56-59, (2004)
  • [8] Cao M., Wang Z., Zhang Q., Microstructure-dependent mechanical properties of semi-solid copper alloys, Journal of Alloys and Compounds, 715, 8, pp. 413-420, (2017)
  • [9] Jiang H.T., Li M.Q., Grain growth of Al-4Cu-Mg alloy during isothermal heat treatment, Journal of University of Science and Technology Beijing, 13, 1, pp. 67-72, (2006)
  • [10] Zhang L., Cao Z.Y., Liu Y.B., Microstructure evolution of semi-solid Mg-14Al-0.5Mn alloys during isothermal heat treatment, Transactions of Nonferrous Metals Society of China, 20, 7, pp. 1244-1248, (2010)
12