Centerline segregation mechanism of twin-roll cast A3003 strip

被引：0
|
作者：
20152000849527
机构：
[1] Lv, Zheng
[2] Du, Fengshan
[3] An, Zhongjian
[4] Huang, Huagui
[5] Xu, Zhiqiang
[6] Sun, Jingna
来源：
Du, Fengshan (fsdu@ysu.edu.cn) | 1600年 / Elsevier Ltd卷 / 643期
关键词：
The centerline segregation mechanism of twin-roll cast A3003 strip was analyzed from the perspective of macro and micro; and a mathematical model considering flow field; solute field and temperature field has been developed. The distribution of Fe and Mn elements in A3003 alloy molten pool was obtained by the model. The simulated results agreed well with the measured data. The dendrites grew rapidly along (0 0 1) direction in the form of columnar crystal. Meanwhile; the solute elements were concentrated near the centerline gradually; and the concentration of solutes would reach the maximum in the Kiss point zone. For A3003 strip; the content of Fe in the Kiss point zone was much higher than the rest; which is the primary cause for centerline segregation. The location of Kiss point is the main factor for centerline segregation; and the segregation tends to decrease with the location rising. © 2015 Elsevier B.V;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
相关论文
共 50 条
  • [1] Centerline segregation mechanism of twin-roll cast A3003 strip
    Lv, Zheng
    Du, Fengshan
    An, Zhongjian
    Huang, Huagui
    Xu, Zhiqiang
    Sun, Jingna
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 643 : 270 - 274
  • [2] Effect of process parameters on centerline segregation of twin-roll strip casting
    Zhang D.-Q.
    Xu Z.-Q.
    An Z.-J.
    Du F.-S.
    Wei J.-P.
    Xu, Zhi-Qiang (xzq@ysu.edu.cn), 2018, Central South University of Technology (28): : 1128 - 1135
  • [3] Elimination of edge cracks and centerline segregation of twin-roll cast aluminum strip by ultrasonic melt treatment
    Huang, Jinxian
    Li, Jianguo
    Li, Cong
    Huang, Chunfa
    Friedrich, Bernd
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (03): : 5034 - 5044
  • [4] A twin-roll caster to cast clad strip
    Haga, I
    Suzuki, S
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 138 (1-3) : 366 - 371
  • [5] Kirkendall Effect in Twin-Roll Cast AA 3003 Aluminum Alloy
    Bajer, Jan
    Zaunschirm, Stefan
    Plank, Bernhard
    Slapakova, Michaela
    Bajtosova, Lucia
    Cieslar, Miroslav
    Kastner, Johann
    CRYSTALS, 2022, 12 (05)
  • [6] Microstructural Evolution in Twin-Roll Strip Cast Mg Alloys
    Bae, G. T.
    Park, S. S.
    Kang, D. H.
    Kim, Nack J.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2007, 60 (2-3) : 241 - 244
  • [7] Friction stir welding of twin-roll cast EN AW 3003 plates
    Yucel Birol
    Sefika Kasman
    Metals and Materials International, 2013, 19 : 1259 - 1266
  • [8] Friction stir welding of twin-roll cast EN AW 3003 plates
    Birol, Yucel
    Kasman, Sefika
    METALS AND MATERIALS INTERNATIONAL, 2013, 19 (06) : 1259 - 1266
  • [9] Superplastic behavior of twin-roll strip cast Mg alloy
    Bae, G. T.
    Park, S. S.
    Kang, D. H.
    Bae, J. H.
    Kim, Nack J.
    MAGNESIUM TECHNOLOGY 2007, 2007, : 89 - +
  • [10] Effect of Homogenization on Al-Fe-Si Centerline Segregation of Twin-Roll Cast Aluminum Alloy AA 8011
    Patel, Sooraj
    Mukhopadhyay, Jyoti
    LIGHT METALS 2019, 2019, : 351 - 355
12345