Support Stiffness Dependent on Aero-engine Bearing Assembly Conditions

被引：0

作者：

Jiang Y. ^{[1
]}

Liao M. ^{[2
]}

Chen J. ^{[3
]}

Zeng Y. ^{[3
]}

Shi B. ^{[3
]}

Hong L. ^{[3
]}

机构：

[1] School of Aeronautics and Astronautics, XihuaUniversity, Chengdu

[2] College of Power and Energy, Northwestern Polytechnical University, Xi'an

[3] AECC Sichuan Gas Turbine Establishment, Chengdu

来源：

Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis | 2020年 / 40卷 / 02期

关键词：

Aero-engine; Assembly conditions; Rolling bearing; Support stiffness;

D O I：

10.16450/j.cnki.issn.1004-6801.2020.02.019

中图分类号：

学科分类号：

摘要：

In light of the influence of aero-engine bearing assembly conditions on support stiffness and provide support for dynamic design of aero-engine rotor system and wholeengine vibration control, the identification of the support stiffness by the vibration test data and theoretical calculation is derived based on kineticequations. Experiments are carried out to investigate the variation laws of the support radial stiffness which are changed with the inner and outer ring fit tolerance and the inner and outer ring lock nuts tightening torque of an aero-engine No.5 bearing. The results show that the identification method is correct and viable. When the inner or outer ring is interference fit, the magnitude of interference increases as the support stiffness increases. The support stiffness is insensitive to the inner and outer ring lock nuts tightening torque. When the inner or outer ring is clearance fit, nonlinear resonance appears on the rotor, the bearing stiffness fluctuates randomly and significantly, and is incompatible to the assumption of linear conditions. In short, the fit parameters of inner and outer rings should be selected reasonably in design, in order to avoid deterioration of rotor system vibration features. © 2020, Editorial Department of JVMD. All right reserved.

引用

页码：348 / 354

页数：6

共 11 条

[1] Burrows C.R., Sahinkaya M.N., Parameter estimation of multi-mode rotor-bearing, Mathematical and Physical Sciences, 379, 1777, pp. 367-387, (1982)
[2] Edwards S., Lees A.W., Friswell M.I., Experimental identification of excitation and support parameters of a flexible rotor-bearing-foundation system from a single run-down, Journal of Sound and Vibration, 232, 5, pp. 963-992, (2000)
[3] Tiwari R., Lees A.W., Friswell M.I., Identification of speed-dependent bearing parameters, Journal of Sound and Vibration, 254, 5, pp. 967-986, (2002)
[4] Han Q.K., Yao H.L., Wen B.C., Parameter identifications for a rotor system based on its finite element model and with varying speeds, Acta Mechanica Sinica, 26, 2, pp. 299-303, (2010)
[5] Kim Y.H., Yang B.S., Tan C.C., Bearing parameter identification of rotor-bearing system using clustering-based hybrid evolutionary algorithm, Structural and Multidisciplinary Optimization, 33, 6, pp. 493-506, (2007)
[6] Steffen J.V., Assis E.G., Parameter Identification in Rotor Bearing Systems, Proceedings of the 17th International Modal Analysis Conference, pp. 1000-1006, (1999)
[7] Assis E.G., Steffen J.V., Inverse problem techniques for the Identification of rotor-bearing systems, Inverse Problems in Engng, 11, 1, pp. 39-53, (2003)
[8] Jiang Y.F., Liao M.F., Wang S.J., The design of counter-rotating dual-rotor experimental apparatus, Proceeding of 4th International Symposium on Jet Propulsion and Power Engineering (ISJPPE 2012), 9, pp. 467-472, (2012)
[9] Wang S., Liao M., Control strategy and methods of rotor system by an elastic support/dry friction damper, Journal of Aerospace Power, 26, 10, pp. 2214-2219, (2011)
[10] Wang S., Liao M., Yang S., Experimental investigation on rotor vibration control by elastic support/dry friction damper, Journal of Aerospace Power, 22, 11, pp. 1893-1897, (2007)

← 1 2 →