Impact Deformation Features and Load Characteristics of Truncated Ogival Nose Projectile under Taylor Impact

被引：0
|
作者：
Li J. [1 ,2 ]
Chen G. [2 ]
Huang F. [1 ]
Lu Y. [2 ]
Tan X. [2 ]
Huang W. [2 ]
机构：
[1] State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing
[2] Institute of Systems Engineering, China Academy of Engineering Physics, Mianyang
来源：
Binggong Xuebao/Acta Armamentarii | 2021年 / 42卷 / 06期
关键词：
High-g load; Impact load; Taylor impact; Truncated ogival nose projectile;
D O I：
10.3969/j.issn.1000-1093.2021.06.005
中图分类号：
学科分类号：
摘要：
The impact deformation characteristics and impact load characteristics of truncated ogival nose projectile are analyzed through theory and experiment. The impact load generated by projectile in Taylor impact test is analyzed. Based on the classical Taylor impact theory of blunt projectile, an impact analysis model of ogival nose projectile was established, and the conservation equation of momentum and impulse was modified. The predicting results of the modified model are closer to the actual results. A series of Taylor-Hopkinson impact tests on the cylindrical projectiles with truncated ogival and blunt nose shape were carried out, the impact-induced deformation characteristics of projectiles and variation characteristics of impact load were specifically analyzed for the two kinds of projectiles, and the overall high g-load that the projectiles were subjected to was further discussed. The results show that the nose shape significantly changes the waveform and pulse duration of impact load, and the impact velocity primarily affects the peak value of impact load. The impact characteristics can be regulated by the nose shape design of projectile and the control of impact speed. The results support the assumption that the Taylor impact test can be applied to high-g loading test. © 2021, Editorial Board of Acta Armamentarii. All right reserved.
引用
收藏
页码：1157 / 1168
页数：11
相关论文
共 22 条
  • [1] TAYLOR G I., The use of flat-ended projectiles for determining dynamic yield stress. Ⅰ: theoretical considerations, Proceedings of the Royal Society of London, 194, 1038, pp. 289-299, (1948)
  • [2] WHIFFIN A C., The use of flat-ended projectiles for determining dynamic yield stress. Ⅱ: tests on various metallic materials, Proceedings of the Royal Society of London, 194, 1038, pp. 300-322, (1948)
  • [3] DU W W, WANG L, ZHAO D H, Et al., Study of the dynamic behaviors of Ti-5553 alloy based on Taylor bar impacting test, Acta Armamentarii, 36, 9, pp. 1750-1756, (2015)
  • [4] TESTA G, IANNITTI G., Preliminary investigation on impact resistance of additive manufactured Ti-6Al-4V, Procedia Structural Integrity, 12, pp. 589-593, (2018)
  • [5] BLONIARZ R, MAJTA J, TRUJILLO C, Et al., The mechanisms for strengthening under dynamic loading for low carbon and microalloyed steel, International Journal of Impact Engineering, 114, pp. 53-62, (2018)
  • [6] CHEN G, HUANG X C., Simulation of deformation and fracture characteristics of a 45 steel Taylor impact specimen, Engineering Transsctions, 64, 2, pp. 225-240, (2016)
  • [7] LIU H, YANG J L, LIU H., Effect of a viscoelastic target on the impact response of a flat-nosed projectile, Acta Mechanica Sinica, 34, 1, pp. 162-174, (2018)
  • [8] WANG L L, YANG L M, DING Y Y., On the energy conservation and critical velocities for the propagation of a "steady-shock" wave in a bar made of cellular material, Acta Mechanica Sinica, 29, 3, pp. 420-428, (2013)
  • [9] XIONG X, WANG Z, ZHENG Y X, Et al., Numerical simulations of Taylor impact experiments of quartz glass bars, Chinese Journal of Theoretical and Applied Mechanics, 51, 4, pp. 1082-1090, (2019)
  • [10] XIAO X K, MU Z C, PAN H, Et al., Effect of the Lode parameter in predicting shear cracking of 2024-T351 aluminum alloy Taylor rods, International Journal of Impact Engineering, 120, pp. 185-201, (2018)
123