Development of energy harvesting using speed breaker

被引：0
|
作者：
机构：
[1] Haris, H.C. Mat
[2] Nor, M A N Mohd
[3] Rahiman, M. H. Fazalul
[4] Rahman, N F A Abdul
来源：
| 1600年 / Institute of Electrical and Electronics Engineers Inc., United States卷
关键词：
Energy can neither be created or be destroyed and can only be transform from one form to another. Pressure is a kind of energy that is exerted almost all the time as force and can be either reused within the same process or transferred to another process. Force or when it converts into energy is called potential energy and free of charge energy. Thus; this energy can reduce the operating cost and can increase the output productivity. Pressure has large opportunities and stronger range of force recovery on the road. Therefore; this project utilizes force created from vehicle hump as an alternative and new renewable energy source. A model of road speed breaker which uses power hump technology is used as device to harness force created from applied pressure from the heavy vehicles hitting the speed breaker which act as the input. The speed breaker is used as it can function into two different uses such as for slowing of road vehicles and hence generating energy by harnessing applied force into electrical energy. The electrical energy produced can either be use to power up street lights or stored in a battery for emergency purposes. © 2016 IEEE;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
  • [1] Development of Energy Harvesting Using Speed Breaker
    Haris, H. C. Mat
    Nor, Man Mohd
    Rahiman, M. H. Fazalul
    Rahman, N. F. A. Abdul
    2016 IEEE CONFERENCE ON SYSTEMS, PROCESS AND CONTROL (ICSPC), 2016, : 53 - 57
  • [2] Energy Harvesting using Speed Breaker Mechanism
    Kumar, Shashi B.
    Santhosh, M. R.
    Yuvaraja, T.
    2017 INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONICS, COMMUNICATION, COMPUTER, AND OPTIMIZATION TECHNIQUES (ICEECCOT), 2017, : 201 - 204
  • [3] Deflection-Based Energy Harvesting Speed Breaker and It's Mechatronic Application
    Raj, Nikhil
    Dasgotra, Ankit
    Mondal, Surajit
    Kumar, Suresh
    Patel, Ravi Kumar
    INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING, 2021, 14 (05) : 1033 - 1042
  • [4] Design of a Efficient Energy Generating System Using Speed Breaker for Bangladesh
    Hossam-E-Haider, Mohammed
    Rokonuzzaman, Md
    2015 5TH NATIONAL SYMPOSIUM ON INFORMATION TECHNOLOGY: TOWARDS NEW SMART WORLD (NSITNSW), 2015,
  • [5] Generation of Electrical Energy Using Road Transport Pressure at Speed Breaker
    Hossain, Md Iqbal
    Akter, Rupa
    Hasan, Mahedi
    Raihan, Ahamed
    Khan, M. F. Shahriar
    Bin Ali, Fahad
    Chakma, Rocky
    Alam, M. J.
    Mahtab, S. S.
    THIRD INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE, SMART STRUCTURES AND APPLICATIONS (ICMSS 2020), 2021, 2327
  • [6] Electricity from Wasted Energy of the Moving Vehicle Using Speed Breaker
    Hossain, Shah Mohazzem
    Das, C. K.
    Hossan, Md Shahdat
    Jarin, Sams
    JURNAL TEKNOLOGI-SCIENCES & ENGINEERING, 2015, 73 (01): : 129 - 134
  • [7] Development of low-speed wind energy harvesting device
    Younis, Adel
    Dong, Zuomin
    El Badawy, Mohamed
    Al Khatib, Fadi
    Al Anazi, Abeer
    ENERGY REPORTS, 2022, 8 : 22 - 27
  • [8] Energy Harvesting Circuit for Road Speed Bumps Using a Piezoelectric Cantilever
    Hyun, Ji Hoon
    Chen, Nan
    Ha, Dong Sam
    IECON 2018 - 44TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2018, : 4219 - 4223
  • [9] Development of an energy harvesting damper using PVDF film
    Yoon, Sang-Jae
    Arakawa, Kazuo
    Uchino, Masakazu
    INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2015, 39 (11) : 1545 - 1553
  • [10] Development of HVDC Circuit Breaker with Fast Interruption Speed
    Kim, Byoung-Choul
    Chung, Young-Hwan
    Hwang, Hui-Dong
    Mok, Hyung-Soo
    2015 9TH INTERNATIONAL CONFERENCE ON POWER ELECTRONICS AND ECCE ASIA (ICPE-ECCE ASIA), 2015, : 2844 - 2848
12345