Evaluation of the influence of surface finishing on the corrosion resistance of HVOF applied inconel 625 coatings on steel

被引:0
|
作者
Lorenzi M.S.D. [1 ]
Nunes R.M. [1 ]
Falcade T. [1 ]
Clarke T. [1 ]
机构
[1] Laboratório de Metalurgia Física - LAMEF, Universidade Federal do Rio Grande do Sul - UFRGS, Porto Alegre, RS
关键词
Corrosion Resistanc; HVO; Inconel; 62; Residual Stresse;
D O I
10.1590/1980-5373-mr-2016-0844
中图分类号
学科分类号
摘要
In this work, the corrosion resistance of Inconel 625 coatings applied to AISI 4140 steel plates was evaluated. Coatings were produced by High Velocity Oxygen Fuel (HVOF) by use of two different equipment which use either kerosene (liquid) or propane (gas) as fuel. The resulting coatings were evaluated in two conditions: as-deposited and after a surface finishing process by grinding. Residual stress distributions in the coatings were characterized by X-ray diffraction and their morphology was verified through metallography and roughness measurements. Potentiodynamic polarization corrosion testing complemented their analysis. The results show a strong influence of the surface finishing process on the corrosion performance of the coatings. © 2018 Universidade Federal de Sao Carlos. All rights reserved.
引用
收藏
相关论文
共 50 条
  • [1] Evaluation of the Influence of Surface Finishing on the Corrosion Resistance of HVOF Applied Inconel 625 Coatings on Steel
    de Lorenzi, Mariana Sgambaro
    Nunes, Rafael Menezes
    Falcade, Tiago
    Clarke, Thomas
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2018, 21 (02):
  • [2] Tensile properties of HVOF sprayed Inconel 625 coatings subjected aqueous corrosion
    Boudi, A
    Hashmi, MSJ
    Yilbas, BS
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2006, 58 (01) : 45 - 49
  • [3] Microstructure formation and corrosion behaviour in HVOF-sprayed Inconel 625 coatings
    Zhang, D
    Harris, SJ
    McCartney, DG
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 344 (1-2): : 45 - 56
  • [4] Boriding of HVOF-sprayed Inconel 625 coatings
    Lindner, Thomas
    Loebel, Martin
    Hunger, Ralph
    Berger, Robin
    Lampke, Thomas
    SURFACE & COATINGS TECHNOLOGY, 2020, 404 (404):
  • [5] Consolidation mechanism, microstructural evolution and corrosion resistance of Inconel 625 coatings
    Olakanmi, Eyitayo Olatunde
    Malikongwa, Kinsman
    Nyadongo, Sipiwe Trinity
    Hoosain, Shaik
    Pityana, Sisa Lesley
    SURFACE ENGINEERING, 2021, 37 (02) : 212 - 225
  • [6] HVOF coating of Inconel 625 onto stainless and carbon steel surfaces: corrosion and bond testing
    Boudi, AA
    Hashmi, M
    Yilbas, BS
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 155 : 2051 - 2055
  • [7] Improving corrosion and wear performance of HVOF-sprayed Inconel 625 and WC-Inconel 625 coatings by high power diode laser treatments
    Liu, Z.
    Cabrero, J.
    Niang, S.
    Al-Taha, Z. Y.
    SURFACE & COATINGS TECHNOLOGY, 2007, 201 (16-17): : 7149 - 7158
  • [8] Influence of HVOF parameters on the corrosion resistance of NiWCrBSi coatings
    Gil, L
    Staia, MH
    THIN SOLID FILMS, 2002, 420 : 446 - 454
  • [9] Influence of voltage, feed speed and CTWD on the corrosion resistance of Inconel 625 alloy coatings deposited by MIG
    de Lima, Igor Jaloto
    de Farias Ferreira, Beatriz Candida
    dos Santos, Aureliano Xavier
    Maciel, Theophilo Moura
    Costa de Santana, Renato Alexandre
    MATERIA-RIO DE JANEIRO, 2022, 27 (02):
  • [10] Corrosion behavior of HVOF Inconel 625 coating in the simulated marine environment
    彭超
    钟丰平
    袁梦
    谢世杰
    王学斌
    China Welding, 2024, 33 (01) : 46 - 51