Design and implementation of dstatcom for fast load compensation of unbalanced loads

被引：0

作者：

Chang, Wei-Neng ^{[1
]}

Yeh, Kuan-Din ^{[1
]}

机构：

[1] Department of Electrical Engineering, Chang Gung University, Tao-Yuan, Taiwan

来源：

Journal of Marine Science and Technology | 2009年 / 17卷 / 04期

关键词：

MATLAB - Computer hardware - Electric network analysis - Electric power distribution - Digital arithmetic;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

This paper proposes a distribution level static synchronous compensator (DSTATCOM) for fast load compensation of unbalanced loads in electric power distribution systems. For fast response requirement, a new feedforward compensation scheme is derived and employed in the paper. First, the compensation scheme of the DSTATCOM is derived with the symmetrical components method. Then, computer simulation with the program Matlab/Simulink preliminarily verifies the effectiveness of the proposed DSTATCOM. Accordingly, a hardware prototype is built with a floating-point DSP TMS320C6711-based system. Use of a current-regulated PWM (CRPWM) inverter as the power stage of the DSTATCOM generates needed compensation currents for real-time load compensation. Finally, experimental results confirm the effectiveness of the proposed DSTATCOM.

引用

页码：257 / 263

共 50 条

[1] DESIGN AND IMPLEMENTATION OF DSTATCOM FOR FAST LOAD COMPENSATION OF UNBALANCED LOADS
Chang, Wei-Neng
Yeh, Kuan-Dih
JOURNAL OF MARINE SCIENCE AND TECHNOLOGY-TAIWAN, 2009, 17 (04): : 257 - 263
[2] Design and implementation of DSTATCOM with symmetrical components method for fast load compensation of unbalanced distribution systems
Chang, WN
Yeh, KD
PEDS 2003 : FIFTH INTERNATIONAL CONFERENCE ON POWER ELECTRONICS AND DRIVE SYSTEMS, VOLS 1 AND 2, PROCEEDINGS, 2003, : 1547 - 1551
[3] Individual phase control of cascaded DSTATCOM for unbalanced load compensation
Wang, Yue
Yang, Kun
Chen, Guozhu
Dianli Zidonghua Shebei/Electric Power Automation Equipment, 2015, 35 (05): : 23 - 28
[4] A development and implementation of DSP based DSTATCOM to compensate unbalanced non-linear loads
Mishra, Mahesh K.
Karthikeyan, K.
Linash, P. K.
2006 IEEE POWER INDIA CONFERENCE, VOLS 1 AND 2, 2006, : 739 - +
[5] Load Compensation using DSTATCOM
Venkateswari, R.
Sreejith, S.
2019 INNOVATIONS IN POWER AND ADVANCED COMPUTING TECHNOLOGIES (I-PACT), 2019,
[6] Load Compensation with DSTATCOM and BESS
Singh, Alka
Bhowmick, Suman
Shukla, Kapil
2012 IEEE 5TH INDIA INTERNATIONAL CONFERENCE ON POWER ELECTRONICS (IICPE 2012), 2012,
[7] Modified Four Leg DSTATCOM Topology for Compensation of Unbalanced and Nonlinear Loads in Three Phase Four wire System
Geddada, Nagesh
Karanki, Srinivas Bhaskar
Mishra, Mahesh K.
Kumar, B. Kalyan
PROCEEDINGS OF THE 2011-14TH EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS (EPE 2011), 2011,
[8] Research and Application ofCompensation Characteristics of DSTATCOM under Unbalanced Load
Xu, Zaide
Liu, Yang
Cao, Bei
Liu, Bei
Li, Shengjian
PROCEEDINGS OF 2018 IEEE 3RD ADVANCED INFORMATION TECHNOLOGY, ELECTRONIC AND AUTOMATION CONTROL CONFERENCE (IAEAC 2018), 2018, : 806 - 810
[9] Design and Implementation of a STATCOM Based on a Multilevel FHB Converter with Delta-Connected Configuration for Unbalanced Load Compensation
Chang, Wei-Neng
Liao, Ching-Huan
ENERGIES, 2017, 10 (07):
[10] UNBALANCED LOAD COMPENSATION IN THREE-PHASE POWER SYSTEM WITH A CURRENT-REGULATED DSTATCOM BASED ON MULTILEVEL CONVERTER
Chang, Wei-Neng
Liao, Ching-Huan
Wang, Po-Li
JOURNAL OF MARINE SCIENCE AND TECHNOLOGY-TAIWAN, 2016, 24 (03): : 484 - 492

← 1 2 3 4 5 →