Thermal analysis of electronic cooling with composite phase change material

被引：0
|
作者：
Yin, Hui-Bin [1 ,2 ]
Gao, Xue-Nong [3 ]
Ding, Jing [2 ]
机构：
[1] Guangdong Provincial Key Laboratory of DES, Dongguan University of Technology, Dongguan 523808, China
[2] School of Engineering, Sun Yat-Sen University, Guangzhou 510006, China
[3] Key Laboratory of Enhanced Heat Transfer and Energy Conservation, Ministry of Education, South China University of Technology, Guangzhou 510640, China
来源：
Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics | 2012年 / 33卷 / 05期
关键词：
Specific heat - Phase change materials - Numerical models - Thermoelectric equipment - Electronic cooling - Numerical methods;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
According to the apparent heat capacity method, the heat transfer model and relevant numerical method in electronic cooling with composite phase change material (PCM) were built. The Icepak software was used to carry out the thermal analysis in this model and its temperature field and flow field were analyzed. The results of numerical simulation are close to the experimental values and the maximum relative error between them is 8.8%, which indicate that the numerical model and relevant simplified methods are accurate. It can simulate the thermal status in the electronic devices factually in virtue of the thermal analysis means and accordingly provide a basis for the thermal design and thermal management of electronic devices.
引用
收藏
页码：831 / 834
相关论文
共 50 条
  • [1] Thermal Analysis of a Phase Change Material Based Heat Sink for Cooling Protruding Electronic Chips
    Mustapha FARAJI
    Hamid EL QARNIA
    EI Khadir LAKHAL
    JournalofThermalScience, 2009, 18 (03) : 268 - 275
  • [2] Thermal analysis of a phase change material based heat sink for cooling protruding electronic chips
    Mustapha Faraji
    Hamid El Qarnia
    El Khadir Lakhal
    Journal of Thermal Science, 2009, 18 : 268 - 275
  • [3] Thermal Analysis of a Phase Change Material Based Heat Sink for Cooling Protruding Electronic Chips
    Faraji, Mustapha
    El Qarnia, Hamid
    Lakhal, El Khadir
    JOURNAL OF THERMAL SCIENCE, 2009, 18 (03) : 268 - 275
  • [4] Thermal performance assessment of phase change material for electronic cooling: An experimental investigation
    Pandiyan, Prashanth Soundra
    Dandotiya, Devendra
    Maloor, Surendrakumar Alathadi
    Rajagopalan, Sudheer
    ENERGY STORAGE, 2023, 5 (03)
  • [5] Phase change material integrated cooling for transient thermal management of electronic devices
    Kim, Soonwook
    Yang, Tianyu
    Miljkovic, Nenad
    King, William P.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2023, 213
  • [6] Research on the thermal management performance of electronic chip with composite phase change material
    Gao, X.-N. (cexngao@scut.edu.cn), 2013, Zhejiang University (27):
  • [7] Thermal analysis of metal foam matrix composite phase change material
    Xiange Song
    Journal of Thermal Science, 2015, 24 : 386 - 390
  • [8] Thermal Analysis of Metal Foam Matrix Composite Phase Change Material
    Song Xiange
    JOURNAL OF THERMAL SCIENCE, 2015, 24 (04) : 386 - 390
  • [9] Thermal Analysis of Metal Foam Matrix Composite Phase Change Material
    SONG Xiange
    JournalofThermalScience, 2015, 24 (04) : 386 - 390
  • [10] A delayed cooling system coupling composite phase change material and nano phase change material emulsion
    Cao, Jiahao
    Feng, Jinxin
    Fang, Xiaoming
    Ling, Ziye
    Zhang, Zhengguo
    APPLIED THERMAL ENGINEERING, 2021, 191
12345