Design and Performance Study of Magnetorheological Fluid Damper for Pipeline Vibration Control

被引:0
|
作者
Xin D.-K. [1 ]
Nie S.-L. [1 ]
Ji H. [1 ]
Ni Q. [1 ]
机构
[1] Beijing Key Laboratory of Advanced Manufacturing Technology, Beijing University of Technology, Beijing
关键词
COMSOL; Electromagnetic field simulation; MR damper; Pipeline vibration;
D O I
10.15918/j.tbit1001-0645.2018.448
中图分类号
学科分类号
摘要
To meet the requirements of vibration and noise reduction in hydraulic pipeline, a design method of double-outlet shear-valve magnetorheological(MR) damper was proposed. Based on the Bingham model of MR damper, combining the structural design of the MR damper with the design of the magnetic circuit, the calculation formula of the structural parameters of the damper was deduced. A finite element analysis software COMSOL was selected to simulate the electromagnetic field. An accurate and simple computational method based on the simulation model was established to calculate the viscous stress and shear stress under different control current. According to the proposed design method, a prototype of MR damper was developed, and the dynamic mechanical properties of prototype were tested. The test results show that the performance parameters of the MR damper are basically identical with the theoretical design values, which proves the correctness and feasibility of this design method, and the design method can simplify the design process and reduce the volume of MR damper. © 2019, Editorial Department of Transaction of Beijing Institute of Technology. All right reserved.
引用
收藏
页码:1252 / 1257
页数:5
相关论文
共 9 条
  • [1] Quan L., Kong X., Yu B., Et al., Research status and trends on fluid-structure interaction vibration mechanism and control of hydraulic pipeline, Journal of Mechanical Engineering, 51, 18, pp. 175-183, (2015)
  • [2] Jay M., Bob M., Controlling noise and vibration from a pipeline pump station, Sound and Vibration, 5, pp. 8-11, (2017)
  • [3] Song G., Zhang P., Li L., Vibration control of a pipeline structure using pounding tuned mass damper, American Society of Civil Engineers, 142, 6, pp. 1-10, (2016)
  • [4] Wang J., Wang T., Wang J., Hybrid modeling of gas transport pipeline based on pressure signals, Transactions of Beijing Institute of Technology, 34, 1, pp. 5-10, (2014)
  • [5] Zhang J., Wang X., Sun Y., Et al., Review on the technology of self-powered self-sensing magnetorheological damper, Chinese Hydraulics & Pneumatics, 4, pp. 96-101, (2017)
  • [6] Ouyang Q., Wang J., Review of temperature dependent performance and temperature compensation control of magnetorheological damper, Transactions of Beijing Institute of Technology, 38, 7, pp. 668-675, (2018)
  • [7] Hu G., Zhong F., Hu A., Et al., Pressure drop analysis of an improved radial type magnetorheological valve, Transactions of Beijing Institute of Technology, 38, 5, (2018)
  • [8] Hu G., Liu F., Xie Z., Design, analysis, and experimental evaluation of a double coil magnetorheological fluid damper, Shock and Vibration, pp. 1-12, (2016)
  • [9] AC/DC Module User's Guide, (2017)