Production of new welding fluxes based on silicomanganese slag

被引：0

作者：

Kryukov N.E. ^{[1
]}

Kozyreva O.E. ^{[2
]}

Kryukov R.E. ^{[2
]}

Kozyrev N.A. ^{[2
]}

Usol’Tsev A.A. ^{[2
]}

机构：

[1] Siberian State Industrial University, Novokuznetsk

来源：

Welding International | 2018年 / 32卷 / 10期

关键词：

fluxes; grain size; mechanical properties; microstructure; nonmetallic inclusions; samples; technology; welding; welding joint;

D O I：

10.1080/09507116.2017.1388051

中图分类号：

学科分类号：

摘要：

The properties of a welding flux based on the silicomanganese slag are investigated. The flux is produced using the slag formed in the production of silicomanganese with different ratios of the slag fractions and different content of the water glass in the flux addition. The addition of up to 20–30% dust fraction of the silicomanganese slag to the composition of the flux results in excellent mechanical properties of specimens taken from the welded plates. The FD-UFS addition reduces the extent of contamination with non-metallic inclusions and reduces the size and amount of these inclusions. The optimum content of the water glass in the flux (up to 20–30%) was determined. Consequently, the resultant mechanical properties of the specimens taken from the welded plates are very high. © 2020, © 2020 Informa UK Limited, trading as Taylor & Francis Group.

引用

页码：672 / 677

页数：5

共 50 条

[1] Manufacturing of New Welding Fluxes Using Silicomanganese Slag
Kryukov, Roman E.
Kozyrev, Nikolay A.
Kozyreva, Olga A.
Usoltsev, Aleksander A.
INTERNATIONAL SCIENTIFIC-PRACTICAL CONFERENCE: INNOVATIONS IN FUEL AND ENERGY COMPLEX AND MECHANICAL ENGINEERING (FEC-2017), 2017, 253
[2] Production of Welding Fluxes Using Waste Slag Formed in Silicomanganese Smelting
Kozyrev, N. A.
Kryukov, R. E.
Kozyreva, O. E.
Lipatova, U. I.
Filonov, A. V.
ALL-RUSSIA SCIENTIFIC AND PRACTICAL CONFERENCE ON MATERIALS TREATMENT: CURRENT PROBLEMS AND SOLUTIONS, 2016, 125
[3] New welding fluxes based on silicomanganese slag for deposition and welding of canopies and crib bed of mine support
Kryukov, R. E.
Kozyrev, N. A.
Usoltsev, A. A.
Kozyreva, O. E.
INTERNATIONAL SCIENTIFIC AND RESEARCH CONFERENCE ON KNOWLEDGE-BASED TECHNOLOGIES IN DEVELOPMENT AND UTILIZATION OF MINERAL RESOURCES (KTDMUR2017), 2017, 84
[4] The Possibility of Using Silicomanganese Slag and Ladle Electric Steelmaking Slag in Manufacture of Welding Fluxes
Kozyrev N.A.
Mikhno A.R.
Usol’tsev A.A.
Kryukov R.E.
Simachev A.S.
Steel in Translation, 2021, 51 (10) : 683 - 687
[5] On the use of slag from silicomanganese production for welding flux manufacturing
Kozyrev, N. A.
Kryukov, R. E.
Lipatova, U. I.
Kozyreva, O. E.
XIX INTERNATIONAL SCIENTIFIC CONFERENCE ON METALLURGY: TECHNOLOGIES, INNOVATION, QUALITY (METALLURGY2015), 2016, 150
[6] Use of silicomanganese slag and ladle electric steelmaking slag in manufacturing the welding fluxes for surfacing the mining equipment
Kozyrev, N. A.
Mikhno, A. R.
Usoltsev, A. A.
Kryukov, R. E.
Umanskiy, A. A.
INTERNATIONAL SCIENTIFIC CONFERENCE KNOWLEDGE-BASED TECHNOLOGIES IN DEVELOPMENT AND UTILIZATION OF MINERAL RESOURCES, 2018, 206
[7] Kinetics of Slag Reduction in Silicomanganese Production
Vincent Canaguier
Merete Tangstad
Metallurgical and Materials Transactions B, 2020, 51 : 953 - 962
[8] Kinetics of Slag Reduction in Silicomanganese Production
Canaguier, Vincent
Tangstad, Merete
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2020, 51 (03): : 953 - 962
[9] Use of barium - strontium modifier in manufacturing welding flux based on silicomanganese slag for welding and surfacing mining equipment
Kozyrev, N. A.
Mikhno, A. R.
Kryukov, R. E.
Yakushevich, N. F.
Provodova, A. A.
INTERNATIONAL SCIENTIFIC CONFERENCE KNOWLEDGE-BASED TECHNOLOGIES IN DEVELOPMENT AND UTILIZATION OF MINERAL RESOURCES, 2018, 206
[10] Manganese and silicon distribution between slag and metal in silicomanganese production
Ding, WH
Olsen, SE
ISIJ INTERNATIONAL, 2000, 40 (09) : 850 - 856

← 1 2 3 4 5 →