Preparation of high-purity and ultrafine magnesium oxide

被引：0

作者：

Guo K. ^{[1
]}

Yang X. ^{[1
]}

Liu Z. ^{[1
]}

Xu H. ^{[1
]}

Huang H. ^{[1
]}

机构：

[1] School of Metallurgy and Environment, Central South University, Changsha

来源：

Cailiao Daobao/Materials Review | 2016年 / 30卷 / 06期

关键词：

Magnesium oxide; Precipitation; Ultrafine;

D O I：

10.11896/j.issn.1005-023X.2016.12.021

中图分类号：

学科分类号：

摘要：

Magnesium hydroxide precursor was obtained by direct precipitation method with MgCl2·6H2O and ammonia as raw material and PVA and CTAB as additives.The high purity and ultrafine magnesium oxide was prepared by calcinations of magnesium hydroxide precursor. The effects of various factors such as temperature, magne-sium concentration, additive amount, ratio of ammonia to magnesium and calcination temperature on the particle size of MgO were investigated systematically. The optimum process conditions were as follows: the reaction temperature 40℃, the concentration of Mg2+ 1 mol/L, the concentration of PVA 0.6%, the concentration of CTAB 1.2%, the molar ratio of NH3·H2O to MgCl2·6H2O 3.3: 1, calcintion temperature 600℃ and time 3 h. The fluorescence spectrum analysis showed that the purity of MgO was higher than 99.9%. The laser particle size analysis and SEM results showed that the average particle size was 190 nm with good dispersity and normal distribution. © 2016, Materials Review Magazine. All right reserved.

引用

页码：95 / 99

页数：4

共 25 条

[1] Liu T., Pengcheng M.A., Jingkun Y.U., Et al., Preparation of MgO by thermal decomposition of Mg(OH)2, J Chinese Ceram Soc, 38, 7, (2010)
[2] Maliyekkal S.M., Anshup, Antony K.R., Et al., High yield combustion synthesis of nano-magnesia and its application for fluoride removal, Sci Total Environ, 408, 10, (2010)
[3] Liu J., Yi F.Z., Min W.W., Et al., Microstructural evolution and me-chanism of grain growth in magnesia ceramics prepared by high pressure and temperature with ultra-high heating rate, Sci China: Technol Sci, 57, 6, (2014)
[4] Yang X.L., Xia C.G., Tang L.P., Et al., Effect of MgO support and BaO promoter on structure and catalytic activity of ruthenium catalysts for ammonia synthesis, Chin J Inorg Chem, 27, 8, (2011)
[5] Zhi S.H., Cao L.H., Wang C., Et al., Study on sintering processing of MgO ceramics, J Synth Cryst, 39, 2, (2010)
[6] Sun Z.P., Teng Y.C., Qi X.M., Et al., Normal pressure sintering and high pressure sintering of superfine Al2O3 powder with high purity, J Chem Ind Eng (China), 58, 11, (2007)
[7] Dai B.Y., Chen T.C., Shang J.L., Et al., Microstrucrure of partially stabilized zirconia foam ceramic with MgO and CeO2, J Silicate, 35, 2, (2007)
[8] Yang C., Hu B.Y., Wang L.S., Et al., Effect of dispersing agent on synthesis of MgO prepared by solid state reaction at lower temperature, J Funct Mater, 38, 2, (2007)
[9] Zhang P., Feng Y.L., Hao-Ran L.I., Et al., Preparation of high-purity magnesia by solid phase reduction decomposition of magnesium sulfate, J Central South University, 42, 9, (2011)
[10] Guan H.B., Wang P., Zhao B.Y., Et al., Synthesis of nanometer magnesia with high surface area by solid-state chemical reaction, Chin J Catal, 27, 9, (2006)

← 1 2 3 →