Preparation of graphene nano sheets/SiC-Cu and carbon nano-tubes/SiC-Cu reinforcements based on Cu plating SiC-Cu particles

被引：0
|
作者：
Liu S. [1 ]
Wang J. [2 ]
Wu S. [1 ]
Dong F. [3 ]
机构：
[1] School of Mechanical Engineering, Xijing University, Xi'an
[2] School of Mechanical & Electrical Engineering, Northwestern Polytechnical University, Xi'an
[3] Xi'an Thermal Power Research Institute, Xi'an
来源：
Liu, Shoufa (liushoufa807456@163.com) | 1600年 / Beijing University of Aeronautics and Astronautics (BUAA)卷 / 34期
关键词：
Carbon nano-tubes(CNTs); CVD; Electroless Cu plating; Graphene nanosheets(GNSs); Photodeposition Cu plating; SiC particles;
D O I：
10.13801/j.cnki.fhclxb.20170220.003
中图分类号：
学科分类号：
摘要：
Graphene nanosheets(GNSs)/SiC-Cu and carbon nano-tubes(CNTs)/SiC-Cu reinforcements were prepared on the surface of electroless Cu (ECu) plating and photodeposition Cu (PCu) plating SiC-Cu particles respectively by chemical vapor deposition (CVD). The effects of temperature and holding time during the preparation on the layers and the quality of GNSs and CNTs were studied by Raman spectroscopy and SEM. The results show that multilayer GNSs and CNTs are successfully prepared on both the surface of ECu plating and PCu plating SiC-Cu particles by CVD. The GNSs prepared at 1 000℃ for 20 min on ECu plating SiC-Cu particles are successfully obtained with good quality and less layer (almost monolayer). The CNTs in the state of interlaced distribution are found between the copper atoms by SEM, whose diameter ranges 10-45 nm. © 2017,Chinese Society for Composite Materials. All right reserved.
引用
收藏
页码：2544 / 2549
页数：5
相关论文
共 20 条
  • [1] Allen M.J., Tung V.C., Kaner R.B., Honeycomb carbon: A review of graphene, Chemical Reviews, 110, 1, pp. 132-145, (2010)
  • [2] Ren F., Zhu G.M., Ren P.G., The latest advances in preparation and application of nano graphene composite, Acta Materiae Compositae Sinica, 31, 2, pp. 263-272, (2014)
  • [3] Ou Z.X., Zheng Y.Y., Xiao D.S., Et al., Preparation and properties of functional modification reduced graphene oxide-carbon nanotubes/thermoplastic polyurethane composite films, Acta Materiae Compositae Sinica, 33, 3, pp. 486-494, (2016)
  • [4] Lee C., Wei X., Kysar J.W., Et al., Measurement of the elastic properties and intrinsic strength of monolayer graphene, Science, 321, 5887, pp. 385-388, (2008)
  • [5] Wu G.M., Zeng T., Zhao H.B., Photoresponse in graphene/n-Si heterojunction and related photovoltaic properties, Chinese Journal of Rare Metals, 39, 7, pp. 599-604, (2015)
  • [6] Yu J.L., Xin B.J., Research status and prospect of chemical vapor deposition growth of graphene on copper substrate, Materials Review, 29, 1, pp. 66-71, (2015)
  • [7] Zhou Y., Hou Z.X., Wang S.H., Et al., Preparation methods and development and application prospects of graphene, Ordnance Material Science and Engineering, 35, 3, pp. 86-90, (2012)
  • [8] Wei B.J., Xiao T., Li X.J., Et al., Preparation and properties of graphene and MWCNTs reinforced epoxy resin composites, Acta Materiae Compositae Sinica, 29, 5, pp. 53-60, (2012)
  • [9] Zhang L.P., Properties analysis and preparation with grapheme magnesium matrix composite in sports equipment, Hot Working Technology, 44, 12, pp. 140-142, (2015)
  • [10] Li X.L., Effect of graphene content on properties of composite for gear, Hot Working Technology, 45, 4, pp. 101-103, (2016)
12