Inductance Coupling Analysis of Novel Isolated Modular Permanent Magnet Machine

被引：0
|
作者：
Yan S.-J. [1 ]
Xu X.-M. [1 ]
Yan W.-H. [2 ]
Gao W.-Z. [2 ]
机构：
[1] School of Information Science & Engineering, Northeastern University, Shenyang
[2] Department of Electrical and Computer Engineering, University of Denver, Denver, 80208, CO
来源：
Yan, Shi-Jie (yanshijie@mail.neu.edu.cn) | 1677年 / Northeast University卷 / 38期
关键词：
Inductive coupling; Isolated module; Parent modules; PMSM; Sub-modules;
D O I：
10.12068/j.issn.1005-3026.2017.12.002
中图分类号：
学科分类号：
摘要：
Aiming at the problems of reliability and maintainability during the operation of high power machine, the structure for a novel independent modular Permanent Magnet Synchronous Machine (PMSM) was designed. The mathematical model of modular PMSM was established and the inductance coupling of three-phase winding between the neighboring modules was analyzed. This machine was composed of detachable stators, whose modular machines could operate separately. Through the proposed concept of parent modules and sub-modules, parent modules were recombined with sub-modules to achieve the inductance decoupling between modules. Meanwhile, by exchanging the winding phase of sub-modules in parent module, the problem of asymmetric three-phase winding parameters caused by the discrete modules was also solved. The feasibility of structure for this machine was proved by the results of finite element analysis. © 2017, Editorial Department of Journal of Northeastern University. All right reserved.
引用
收藏
页码：1677 / 1680and1690
相关论文
共 10 条
  • [1] Kazerooni M., Hamidifar S., Narayan C., Analytical modeling and parametric sensitivity analysis for the PMSM steady-state performance prediction, IET Electric Power Application, 7, 7, pp. 586-596, (2013)
  • [2] Petrov I., Pyrhonen J., Performance of low-cost permanent magnet material in PM synchronous machines, IEEE Transactions on Industrial Electronics, 60, 6, pp. 2131-2138, (2013)
  • [3] Barrero F., Duran M.J., Recent advances in the design, modeling, and control of multiphase machines-part I, IEEE Transactions on Industrial Electronics, 63, 1, pp. 449-458, (2016)
  • [4] Duran M.J., Barrero F., Recent advances in the design, modeling, and control of multiphase machines-part II, IEEE Transactions on Industrial Electronics, 63, 1, pp. 459-468, (2016)
  • [5] Zhang B.-Y., Liu Y., Feng G.-H., Et al., Study on low voltage high-power multi-branch permanent magnet synchronous motor, Proceedings of the 2010 Asia-Pacific Power and Energy Engineering Conference, pp. 1-4, (2010)
  • [6] Zou J.B., Zhao B., Xu Y.X., Et al., An indirect testing method for the mechanical characteristic of multiunit permanent-magnet synchronous machines with concentrated windings, IEEE Transactions on Industrial Electronics, 62, 12, pp. 7402-7411, (2015)
  • [7] Zou J.B., Zeng D.P., Xu Y.X., A new end windings transposition to reduce windings eddy loss for 2MW direct drive multi-unit PMSM, IEEE Transactions on Magnetics, 48, 11, pp. 3323-3326, (2012)
  • [8] Wang J.Y., Li Y., Han Y.H., Integrated modular motor drive design with GaN power FETs, IEEE Transactions on Industry Applications, 51, 4, pp. 3198-3207, (2015)
  • [9] Zhang B.-Y., Jia Y.-Q., Chen Q.-Y., Et al., Research on partitioning principle and unequal span winding of novel AC machine with module combination stator, Technology of Electrical Engineering and Energy, 34, 5, pp. 24-29, (2015)
  • [10] Gieras J.F., Permanent Magnet Motor Technology-Design and Application, (2010)
1