Influence factors of coal surface wettability

被引：0
|
作者：
Li J.-Y. [1 ]
Li K.-Q. [1 ]
机构：
[1] School of Resource and Environment, Henan Polytechnic University, Jiaozuo
来源：
Meitan Xuebao/Journal of the China Coal Society | 2016年 / 41卷
关键词：
Coal; Contact angle; Influence factors; Wettability;
D O I：
10.13225/j.cnki.jccs.2015.1656
中图分类号：
学科分类号：
摘要：
In order to study the influence mechanism of coal surface wettability, 16 kinds of coals with different metamorphic degrees were characterized by the measurement of contact angle. Metamorphic of coal (rank), chemical composition, oxygen containing functional groups, the fractal dimension of coal, and the specific surface area were studied by means of virtrinite reflectance determination, industry analysis, elemental analysis, infrared spectrum experiment, and the determination of laser granulometer. The least square method and the contact angle were used to establish the linear fitting. The results verify that coal surface wettability mainly depends on oxygen content, moisture, ash and the content of functional groups. The hydrophilic functional groups mainly include the 910-940 cm-1 hydroxyl deformation and the 3400-3450 cm-1 aromatic hydroxyl extension, carbonyl and carboxyl groups were not obvious in the samples. At the same time, along with the increase of coal rank, carbon content and fixed carbon, the contact angle increase and the wetting property becomes worse. Fractal dimension is used to characterize particle size distribution, with the coal particle size D10, D50, and D90 becoming smaller, the fractal dimension increases, the contact angle becomes larger, and the wetting property becomes worse. © 2016, Editorial Office of Journal of China Coal Society. All right reserved.
引用
收藏
页码：448 / 453
页数：5
相关论文
共 16 条
  • [1] Cheng Y., Jiang Z., Chen Z., Coal seam water injection adding surfactant research, Safety in Coal Mines, 37, 3, pp. 9-12, (2006)
  • [2] Xiao Z., Wang Z., The mechanism of coal seam water injecttion prevention and cure of coal and gas outburst research status and progress, China Safety Science Journal, 19, 10, pp. 151-158, (2009)
  • [3] Wang K., Comprehensive coal dust control of fully mechanized coal mining face, Coal Science and Technology, 33, 1, pp. 48-50, (2005)
  • [4] Yang L., Ouyang Y., Ke W., Et al., Research on the impact factors of coal wettability, Coal, 21, 8, pp. 4-5, (2001)
  • [5] Yang J., Tan Y., Wang Z., Et al., Study on the coal dust surface characteristics and wetting mechanism, Journal of China Coal Society, 32, 7, pp. 737-740, (2007)
  • [6] Dong P., Shan Z., Li Z., Study on the surface wet characteristic of ultrafine coal powder, Journal of China Coal Society, 29, 3, (2004)
  • [7] Sun Y., Nie R., Ma S., Study on the influencing factor of wettability of coal dust, Coal Preparation Tecnology, 2, pp. 31-33, (2013)
  • [8] Yang J., Tan Y., Wu X., Et al., Study on the dynamic model of wetting coal dust, Journal of China Coal Society, 34, 8, pp. 1105-1109, (2009)
  • [9] Jie X., Fu G., The measuring methods of coal wetting are discussed, Coal Science and Technology, 32, 2, pp. 65-67, (2004)
  • [10] Wang C., Lin B., Li Q., Et al., Coal dust oxygen containing functional groups on coal surface wettability, Safety in Coal Mines, 45, 5, pp. 173-176, (2014)
12