Micro topography and low frequency sound absorption performance of magnetic polyurethane foam

被引：0
|
作者：
Wang C. [1 ]
Sun T. [2 ]
Wang X. [1 ,2 ]
机构：
[1] Institute of Advanced Manufacturing Technology, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Changzhou
[2] Engineering Research Center of Automotive Electronics and Embedded System, Chongqing University of Posts and Telecommunications, Chongqing
来源：
Wang, Xiaojie (xjwang@iamt.ac.cn) | 2018年 / Beijing University of Aeronautics and Astronautics (BUAA)卷 / 35期
关键词：
Carbonyl iron; Low-frequency sound absorption; Micro topography; Polyurethane foam; The ratio of polyether polyol and isocyanate;
D O I：
10.13801/j.cnki.fhclxb.20170417.003
中图分类号：
学科分类号：
摘要：
Traditional polyurethane foam was not good at absorbing the low-frequency noise, so magnetic polyurethane foam (MPF) loaded with carbonyl iron powder (CIP) was presented by one-step full water foaming method. Sound absorption test-platform of MPF was built. The influence of both the ratio of polyether polyols and isocyanate and CIP on sound absorption properties was investigated from both macroscopic and microscopic view. The micro topography of MPF was observed through SEM, the cell size was analyzed using statistical method, and the sound absorption performance of 64-1 600 Hz was tested by impedance tube and the transfer function method. The results show that the addition of CIP makes the average pore size of MPF decrease, the logarithmic distribution standard deviation increase, the open rate increase and the low-frequency sound absorption performance improve, especially less than 500 Hz; when the ratio of polyether polyol and isocyanate is 100:60, with 5wt% CIP, the low-frequency sound absorption performance of MPF is optimal and the average sound absorption coefficient of 64-500 Hz is 0.22. © 2018, Editorial Office of Acta Materiae Compositae Sinica. All right reserved.
引用
收藏
页码：24 / 29
页数：5
相关论文
共 20 条
  • [1] D'Auria M., Davino D., Pantani R., Et al., Polymeric foam-ferromagnet composites as smart lightweight materials, Smart Materials & Structures, 25, 5, (2016)
  • [2] Wang Y.H., Research on sound absorption properties and mechanisms of multi-level bionic coupling materials, (2014)
  • [3] Gayathri R., Vasanthakumari R., Padmanabhan C., Sound absorption, thermal and mechanical behavior of polyurethane foam modified with nano silica, nano clay and crumb rubber fillers, International Journal of Scientific & Engineering Research, 4, 5, pp. 301-308, (2013)
  • [4] Xi Y., Fang Z.G., Li X.X., Et al., Study on polyvinyl chloride based mixed absorption material, Polymer Materials Science and Engineering, 17, 3, pp. 129-132, (2001)
  • [5] Saint-Michel F., Chazeau L., Cavaille J.Y., Mechanical properties of high density polyurethane foams: II Effect of the filler size, Composites Science and Technology, 66, 15, pp. 2709-2718, (2006)
  • [6] Schumann M., Gunther S., Odenbach S., The effect of magnetic particles on pore size distribution in soft polyurethane foams, Smart Materials & Structures, 23, 7, pp. 697-707, (2014)
  • [7] Sorrentino L., Aurilia M., Forte G., Et al., Anisotropic mechanical behavior of magnetically oriented iron particle reinforced foams, Journal of Applied Polymer Science, 119, 2, pp. 1239-1247, (2011)
  • [8] Acoustics-Determination of sound absorption coefficient and impedance in impedance tubes-Part 2: Transfer function method: GB/T 18696.2-2002, (2002)
  • [9] Hoang M.T., Perrot C., Identifying local characteristic lengths governing sound wave properties in solid foams, Journal of Applied Physics, 113, 8, (2013)
  • [10] Perrot C., Panneton R., Olny X., Periodic unit cell reconstruction of porous media: Application to open-cell aluminum foams, Journal of Applied Physics, 101, 11, (2007)
12