Analysis of risk using FMEA

被引：2

作者：

Földešiová, Daniela ^{[1
]}

Korenko, Maroš ^{[1
]}

Ferancová, Martina ^{[1
]}

Kaplík, Pavol ^{[1
]}

机构：

[1] Department of Quality and Engineering Technologies, Slovak University of Agriculture in Nitra, Tr. A. Hlinku 2, 949 76 Nitra, Slovakia

来源：

Advanced Materials Research | 2013年 / 801卷

关键词：

Cold forming - Corrective measures - Failure mode and effects analysis - FMEA method - Potential errors - Potential risks - Risk Priority Number - Slovakia;

D O I：

10.4028/www.scientific.net/AMR.801.81

中图分类号：

学科分类号：

摘要：

Failure mode and effects analysis (FMEA) was performed in RIBE Slovakia, k.s. (limited partnership) in Nitra, Slovakia. Analysis was done in the process of cold forming where potential errors (failures) were identified. Subsequently, there was assigned a mark in the FMEA form expressing severity, frequency and undetectability, and a risk priority number (RPN) was calculated. If the risk priority number (RPN) is too high, corrective measures are proposed and adopted in order for the risk to be minimized or completely eliminated. © (2013) Trans Tech Publications, Switzerland.

引用

页码：81 / 85

共 50 条

[1] Effectiveness of FMEA Risk Analysis
Panyukov D.I.
Kozlovskii V.N.
Aidarov D.V.
Shakurskii M.V.
Russian Engineering Research, 2022, 42 (10) : 1070 - 1072
[2] Risk prioritization using a modified FMEA analysis in industry 4.0
Salah, Bashir
Alnahhal, Mohammed
Ali, Mujahid
JOURNAL OF ENGINEERING RESEARCH, 2023, 11 (04): : 460 - 468
[3] Risk analysis of poultry feed production using fuzzy FMEA
Wessiani, Naning Aranti
Sarwoko, Satria Oktaufanus
INDUSTRIAL ENGINEERING AND SERVICE SCIENCE 2015, IESS 2015, 2015, 4 : 270 - 281
[4] Risk Analysis in Manufacturing Processes: An Integrated Approach Using the FMEA Method
Basto, Luis
Lopes, Isabel
Pires, Claudia
ADVANCES IN PRODUCTION MANAGEMENT SYSTEMS: SMART MANUFACTURING AND LOGISTICS SYSTEMS: TURNING IDEAS INTO ACTION, APMS 2022, PT I, 2022, 663 : 260 - 266
[5] Economic Efficiency of FMEA Risk Analysis
Panyukov D.I.
Kozlovskii V.N.
Aidarov D.V.
Shakurskii M.V.
Russian Engineering Research, 2022, 42 (10) : 1073 - 1076
[6] Radiation Oncology Ransomware Attack Response Risk Analysis Using FMEA
Vinogradskiy, Y.
Schubert, L. K.
Taylor, A.
Rudoler, S.
Lamb, J. M.
MEDICAL PHYSICS, 2024, 51 (10) : 7811 - 7811
[7] Risk analysis of a biomass combustion process using MOSAR and FMEA methods
Thivel, P. -X
Bultel, Y.
Delpech, F.
JOURNAL OF HAZARDOUS MATERIALS, 2008, 151 (01) : 221 - 231
[8] Risk analysis for the supplier selection problem using failure modes and effects analysis (FMEA)
Li, Simon
Zeng, Wei
JOURNAL OF INTELLIGENT MANUFACTURING, 2016, 27 (06) : 1309 - 1321
[9] Risk analysis for the supplier selection problem using failure modes and effects analysis (FMEA)
Simon Li
Wei Zeng
Journal of Intelligent Manufacturing, 2016, 27 : 1309 - 1321
[10] Risk Analysis in Occupational Safety and Health (OSH) by Using FMEA and FTA Method
Iskandar, Mukhamad Nur
Qurtubi
Basumerda, Chancard
2021 INTERNATIONAL CONFERENCE ON DECISION AID SCIENCES AND APPLICATION (DASA), 2021,

← 1 2 3 4 5 →