Discharge Characteristics of Air-Gap Defects in Insulating Material of 12kV Solid Insulated Switchgear

被引：0
|
作者：
Nie Y. [1 ]
Xu W. [1 ]
Zhou W. [1 ]
Peng D. [1 ]
机构：
[1] School of Automation, Guangdong University of Technology, Guangzhou
来源：
Xu, Weidong (3162362831@qq.com) | 2018年 / China Machine Press卷 / 33期
关键词：
air-gap defects; characteristic spectrum; partial discharge; Solid insulation switchgear;
D O I：
10.19595/j.cnki.1000-6753.tces.170702
中图分类号：
学科分类号：
摘要：
In order to obtain the air-gap discharge characteristics of the internal insulation material in 12kV solid insulated switchgears, an experiment platform of internal insulating material air-gap discharge was built. The partial discharge signals were measured under different voltage amplitudes, air-gap diameters and frequencies. The three-dimensional characteristic spectrums of the partial discharge of air-gap defects under different voltage amplitudes were extracted and analyzed, and the differences of partial discharge under positive and negative half cycles at different frequencies were compared. The results show that different voltage amplitudes will affect the amount and number of discharge in case of the air-gap defects in the insulation material of solid insulated switchgear. The higher the harmonic frequency, the more the number of discharges per cycle, but the total discharges in the positive and negative half cycles are maintained at a certain level, without major fluctuations. Moreover, the larger the air gap diameter of the insulating medium, the less the number of discharges, the greater the discharge capacity of each discharge, the more serious the hazard. The three-dimensional graphs obtained under different experimental conditions can be used to identify the air-gap defect discharge of solid insulated switchgear as well as providing the theoretical guidance for the defect discharge of insulating material in solid insulated switchgear. © 2018, Electrical Technology Press Co. Ltd. All right reserved.
引用
收藏
页码：2894 / 2902
页数：8
相关论文
共 17 条
  • [1] Ye H., Ge L., Zhong G., Online detection technology of solid insulation RMU based on infrared thermal imaging, Electric Power, 49, 9, pp. 35-40, (2016)
  • [2] Yuan D., Wang H., Yang F., Et al., Researches on a probabilistic indicating method for assessing end-of-life of solid insulating materials under electrical stress at long-time normal working conditions, High Voltage Apparatus, 53, 4, pp. 31-35, (2017)
  • [3] Zhang Q., Li C., Review on X-ray induced partial discharge, Transactions of China Electrotechnical Society, 32, 8, pp. 22-32, (2017)
  • [4] Zhou S., Jing L., Pattern recognition of partial discharge based on moment features and probabilistic neural network, Power System Protection and Control, 44, 3, pp. 98-102, (2016)
  • [5] Yang Z., Fan L., Yang C., Et al., Charge in gas insulated switchgears based on GK fuzzy clustering & LS-SVM, Power System Protection and Control, 42, 20, pp. 38-45, (2014)
  • [6] Yang F., Yang Q., Cheng P., Et al., Study of cracking extent for gap discharge in insulating material of power cable joint, Transactions of China Electrotechnical Society, 32, 2, pp. 24-32, (2017)
  • [7] Zhou K., Wu K., Wan L., Et al., Validity of inorganic nano-particles on the suppression of partial discharge in air gap defects for medium voltage cable terminations, Transactions of China Electro- technical Society, 31, 22, pp. 230-238, (2016)
  • [8] Schaik N.V., Czaszejko T., Conditions of discharge- free operation of XLPE insulated power cable systems, IEEE Transactions on Dielectrics and Electrical Insulation, 15, 4, pp. 1120-1130, (2008)
  • [9] Chen W., Long Z., Xie B., Et al., Characteristics and development stage recognition of air-gap discharge within oil-paper insulation considering effect of cavity size, Transactions of China Electrotechnical Society, 31, 10, pp. 49-58, (2016)
  • [10] Wan L., Zhou K., Li X., Et al., Toward understanding development mechanism of partial discharge in air gap defects in cable termination by analysis of electric field characteristics, High Voltage Engineering, 40, 12, pp. 3709-3716, (2014)
12