Uncertainty Research of Effects of Blade Tip Clearance Deviation on Blade Aerodynamic Performance

被引：0
|
作者：
Ji T.-Y. [1 ]
Chu W.-L. [1 ]
Dai Y.-C. [1 ]
Zhang Y.-F. [1 ]
机构：
[1] School of Power and Energy, Northwestern Polytechnical University, Xi’an
来源：
Tuijin Jishu/Journal of Propulsion Technology | 2022年 / 43卷 / 10期
关键词：
Aerodynamic performance; Blade tip clearance; Manufacturing error; Non-intrusive polynomial chaos; Uncertainty quantification;
D O I：
10.13675/j.cnki.tjjs.210327
中图分类号：
学科分类号：
摘要：
The deviation between the actual processed blade and the designed blade shape inevitably occurs in the process of compressor blade manufacturing. Rotor 37 was used as the research object，and the three-dimensional constant value simulation method was adopted in order to study the effects of blade tip clearance size fluctuations on blade performance. The size fluctuation interference of the leading edge tip clearance and the trailing edge tip clearance of the blade are respectively performed based on the two-dimensional normal distribution variable generation method in the non-intrusive polynomial chaos. The effects of the uncertainty of the tip clearance on the aerodynamic performance and the uncertainty of the flow field were studied，the correlation between the tip clearance deviation within the tolerance zone and the change of aerodynamic performance was evaluated，and the mechanism of the effects of the tip clearance change on the blade stability margin was explored. The study found that the tip clearance deviation has almost no effect on the average level of blade mass flow，isentropic efficiency and total pressure ratio under equal back pressure conditions. The influence of tip clearance deviation on the standard deviation of aerodynamic performance distribution gradually increases with the approach of the operating point to the unstable boundary. At the same time，the blade tip clearance deviation will cause the sample stability margin to be reduced，and the average stability margin in the uncertainty analysis is 2.42% lower than that of the prototype blade. The tip clearance deviation mainly affects the flow field above 80% of the blade height，and the effects of the tip clearance deviation on the tip leakage flow result in the change of the blade stability margin. © 2022 Journal of Propulsion Technology. All rights reserved.
引用
下载
收藏
相关论文
共 31 条
  • [1] MA Chi, GAO Li-min, LI Rui-yu, Et al., Effects of Tip Clearance Size Fluctuation in Actual Operations on Aerodynamic Performance of a Transonic Rotor, Journal of Propulsion Technology, 41, 9, pp. 1958-1966, (2020)
  • [2] 25, 6, (2007)
  • [3] 1, pp. 31-33, (2021)
  • [4] 2, pp. 39-43, (2020)
  • [5] 12, pp. 372-373, (2012)
  • [6] Li T, Wu Y, Ouyang H., Numerical Investigation of Tip Clearance Effects on Rotating Instability of a Low-Speed Compressor [J], Aerospace Science and Technology, 111, 4, (2021)
  • [7] 34, 4, pp. 44-47, (2013)
  • [8] 52, 11, (2018)
  • [9] Lang A, Voigt M, Vogeler K, Et al., Impact of ManuFacturing Variability on Multi-Stage High-Pressure Compressor Performance[J], Journal of Engineering for Gas Turbine and Power, 134, 11, (2012)
  • [10] Heinze K, Friedl W H, Vogeler K, Et al., Probabilistic HCF-Investigation of Compressor Blade
1234