On-line temperature setup model of reheating furnace based on entropy weight-topsis method

被引：0
|
作者：
Dong X. [1 ]
He A. [1 ]
Sun W. [1 ]
Wang J. [2 ]
Li Z. [2 ]
机构：
[1] National Engineering Research Center of Advanced Rolling (University of Science and Technology Beijing), Beijing
[2] 2250 Hot Strip Mill, HunanValin LY Steel Co., Ltd., Loudi, 417009, Hunan
来源：
He, Anrui (harui@ustb.edu.cn) | 1600年 / Harbin Institute of Technology卷 / 49期
关键词：
Entropy weight-TOPSIS method; Furnace temperature optimization; Furnace temperature setup; Reheating furnace; Slabs;
D O I：
10.11918/j.issn.0367-6234.201602050
中图分类号：
学科分类号：
摘要：
To deal with the difference of heating strategy resulted from the different conditions of the slabs, a kind of entropy weight-TOPSIS method is proposed, which takes a single furnace zone as the research object and combines with the intermediate process of entropy weight and TOPSIS. A concept of special steel grade level is introduced to quantify steel grade, which is taken as the evaluation indexes with the slab temperature difference, slab location and thickness. This model combines the requirements for the difference of evaluation index in the entropy weight method and the weighted method of TOPSIS. The objective entropy weight is used as the closeness degree of the TOPSIS method, and by normalizing it the final weight of the slab is obtained and the temperature of control zone can be set. The simulation results show that, compared with the fixed weight model, the average and maximum temperature difference are decreased by 5.05℃ and 7.77℃, and the fluctuation value of furnace temperature is reduced by 8.98℃. © 2017, Editorial Board of Journal of Harbin Institute of Technology. All right reserved.
引用
收藏
页码：119 / 124
页数：5
相关论文
共 17 条
  • [1] Fujii S., Urayama K., Kashima K., Et al., Simultaneous optimization of charging scheduling and heating control in reheating furnace, Tetsu-to-Hagane, 96, 7, pp. 434-442, (2010)
  • [2] Steinboeck A., Wild D., Kugi A., Nonlinear model predictive control of a continuous slab reheating furnace, Control Engineering Practice, 21, 4, pp. 495-508, (2013)
  • [3] Han S., Chang D., Optimum residence time analysis for a walking beam type reheating furnace, International Journal of Heat & Mass Transfer, 55, pp. 4079-4087, (2012)
  • [4] Steinboeck A., Graichen K., Wild D., Et al., Model-based trajectory planning, optimization, and open-loop control of a continuous slab reheating furnace, Journal of Process Control, 21, 2, pp. 279-292, (2011)
  • [5] Yang Y.J., Jiang Z.Y., Zhang X.X., Et al., On-line dynamic optimization control of heating furnace based on target billet temperature, Metallurgical Industry Automation, 36, 1, (2012)
  • [6] Meng X., Research on optimization methods of furnace temperature in walking beam reheating furnace with operating mode's switch, (2012)
  • [7] Jing H.C., Liu X.Q., Research on optimization of reheating furnace temperature setting, Metallurgical Industry Automation, 39, 1, pp. 48-51, (2015)
  • [8] Duan W., Zhang Y., Nie H., Journals Evaluation and the Application Based on Entropy-TOPSIS, Engineering Management Research, 4, 1, pp. 30-37, (2015)
  • [9] Thakur A., Bhatia O.S., Selection of automotive brake friction materials using hybrid entropy-TOPSIS approach, Journal of Scientific and Engineering Research, 3, 1, pp. 122-128, (2016)
  • [10] Deere S.J., Galeaer, A systematic methodology to assess the impact of human factors in ship design, Applied Mathematical Modeling, 33, 2, pp. 867-883, (2009)
12