Effect of process parameters on surface smoothness in laser cladding

被引：24
|
作者：
Zhu G. [1 ]
Zhang A. [1 ]
Li D. [1 ]
机构：
[1] State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an
来源：
Zhongguo Jiguang/Chinese Journal of Lasers | 2010年 / 37卷 / 01期
关键词：
Forming quality; Laser cladding; Laser technique; Process parameters; Surface smoothness;
D O I：
10.3788/CJL20103701.0296
中图分类号：
学科分类号：
摘要：
To obtain the smooth surface quality of cladding layer, the effects of process parameters on surface smoothness and the ratios of the width and height of cladding layer to surface smoothness were studied by experiments in laser cladding. The relationships of the height and width of cladding layer with center distance and overlapping ratio were analyzed, and the height, width and surface smoothness of cladding layer were tested. The experimental results indicate that the degree of surface smoothness decreases with the increase of laser power and powder mass flow rate and the reducing of traverse speed; the degree of surface smoothness firstly increased then decreased with the growth of carrier gas flow rates.
引用
收藏
页码：296 / 301
页数：5
相关论文
共 15 条
  • [1] Kobryn P.A., Moore E.H., Semiatin S.L., The effect of laser power and traverse speed on microstructure, porosity, and build height in laser deposited Ti-6Al-4V, Scripta Materialia, 43, 4, pp. 299-305, (2000)
  • [2] Zhang K., Liu W., Shang X., Research on the processing experiments of laser metal deposition shaping, Optics & Laser Technology, 39, pp. 549-557, (2007)
  • [3] Li Y., Yang H., Lin X., Et al., The influences of processing parameters on forming characterizations during laser rapid forming, Materials Science and Engineering A, 360, pp. 18-25, (2003)
  • [4] Yu J., Chen J., Tan H., Et al., Effect of process parameters in the laser rapid forming on deposition layer, Chinese J. Lasers, 34, 7, pp. 1014-1018, (2007)
  • [5] Deng Q., Hu D., Rapid prototyping densified metal components by laser cladding, Heat Treatment of Metals, 28, 2, pp. 33-38, (2008)
  • [6] Xi M., Zhang Y., Zhang P., Et al., Influence of processing parameter on the microstructure and properties of the 316L SS fabricated by laser direct deposition, Chinese J. Lasers, A29, 11, pp. 1045-1048, (2002)
  • [7] Liu X., Guan Z., Conditions and factors for obtaining optimum coatings in the laser coating process by a powder feeding method, Chinese J. Lasers, A26, 5, pp. 470-476, (1999)
  • [8] Cai D., Shi Y., Chen G., Et al., Research on optimal scan path in SLS system, Forging Machinery, 2, pp. 18-20, (2002)
  • [9] Ma L., Wu M., Li D., Et al., A study on laser scan strategy of stereo lithography (SL) based on layers' characteristics, Mechanical Science and Technology, 20, 2, pp. 269-271, (2001)
  • [10] Wang J., Li Z., Lu B., The study of scanning path in rapid prototyping, Mechanical Science and Technology, 16, 2, pp. 303-305, (1997)
12