Measurement of three-dimensional temperature and soot volume fraction for RP-3 jet fuel flame

被引：0
|
作者：
Zuo B. [1 ]
Zhou B. [1 ]
Dai M. [1 ]
机构：
[1] School of Energy and Environment, Southeast University, Nanjing
来源：
Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics | 2024年 / 50卷 / 04期
基金：
中国国家自然科学基金;
关键词：
camera stereo calibration; CCD camera; RP-3 jet fuel; soot volume fraction; temperature;
D O I：
10.13700/j.bh.1001-5965.2022.0415
中图分类号：
学科分类号：
摘要：
RP-3 jet fuel is one of the frequently utilized fuels in aviation engines. Temperature and soot volume fraction distribution of flame are the vital data support for fuel optimization, which can directly indicate the state of combustion. The precision of the reconstruction path in three-dimensional measurement was influenced by camera position and attitude. A novel method that combines the radiation imaging system and the camera stereo calibration technology was proposed to address this problem. According to the results of numerical simulation, the method could not only guarantee the accuracy of measurement results, but also provide high spatial resolution. The experimental measurement of RP-3 and air premixed flame were carried out. The three-dimensional temperature and soot volume fraction distribution were also obtained by the calibrated six-camera system. The spatial resolution was 1 mm× 1 mm × 1 mm, and the uncertainty of temperature difference between reconstructed and thermocouple measured temperature was 0.58 K, demonstrating the accuracy of the method. © 2024 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.
引用
收藏
页码：1273 / 1281
页数：8
相关论文
共 22 条
  • [1] JIA Z X, XU G Q, DENG H W, Et al., Dynamic viscosity measurements of aviation hydrocarbon fuel RP-3 at sub-critical pressures, Journal of Beijing University of Aeronautics and Astronautics, 40, 7, pp. 934-938, (2014)
  • [2] GRAUER S J, UNTERBERGER A, RITTLER A, Et al., Instantaneous 3D flame imaging by background-oriented schlieren tomography, Combustion and Flame, 196, pp. 284-299, (2018)
  • [3] YAN W J, LOU C., Two-dimensional distributions of temperature and soot volume fraction inversed from visible flame images, Experimental Thermal and Fluid Science, 50, pp. 229-233, (2013)
  • [4] YAN W J, CHEN D M, YANG Z M, Et al., Measurement of soot volume fraction and temperature for oxygen-enriched ethylene combustion based on flame image processing, Energies, 10, 6, (2017)
  • [5] WORTH N A, DAWSON J R., Tomographic reconstruction of OH<sup>*</sup> chemiluminescence in two interacting turbulent flames, Measurement Science and Technology, 24, 2, (2013)
  • [6] LU G, YAN Y, CORNWELL S, Et al., Impact of co-firing coal and biomass on flame characteristics and stability, Fuel, 87, 7, pp. 1133-1140, (2008)
  • [7] HOSSAIN M M, LU G, YAN Y., Optical fiber imaging based tomographic reconstruction of burner flames, IEEE Transaction on Instrumentation and Measurement, 61, 5, pp. 1417-1425, (2012)
  • [8] XIE Z C, WANG F, ZHANG H D, Et al., Simultaneous reconstruction of three dimensional field parameters based on the visible and near-infrared multi-spectral flame images, Journal of Combustion Science and Technology, 22, 6, pp. 552-557, (2016)
  • [9] LIU H W, ZHENG S, ZHOU H C., Measurement of soot temperature and volume fraction of axisymmetric ethylene laminar flames using hyperspectral tomography, IEEE Transactions on Instrumentation and Measurement, 66, 2, pp. 315-324, (2017)
  • [10] LI M J, SUN K, HE Z., Integrated research of a multi-wavelength method in anisotropic scattering flame on soot temperature and radiative coefficient reconstruction, Applied Optics, 57, 21, pp. 5899-5913, (2018)
123