Experimental Study on Flow Heat Transfer Characteristics of Lead-bismuth Eutectic under Heaving Condition

被引：0
|
作者：
Zhao Y. [1 ]
Liu Z. [1 ]
Wang C. [1 ]
Yu Q. [1 ]
Su G. [1 ]
Qiu S. [1 ]
Tian W. [1 ]
机构：
[1] School of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an
来源：
Yuanzineng Kexue Jishu/Atomic Energy Science and Technology | 2023年 / 57卷 / 08期
关键词：
flow heat transfer; forced circulation; heaving condition; lead-bismuth eutectic;
D O I：
10.7538/yzk.2022.youxian.0877
中图分类号：
学科分类号：
摘要：
Lead-based reactor coolant has high thermal conductivity, good thermal expansion and strong natural circulation ability, which has outstanding advantages in safety, economy and miniaturization. At the same time, lead-bismuth reactors have potential applications in small nuclear power sources, marine reactors and so on. Difference from land-based nuclear power plants, marine nuclear power plants will produce swaying, heaving, tilting and other movements due to their long-term operation in the ocean environment. In order to study the thermal-hydraulic characteristics of the lead-bismuth reactor system under marine conditions, an experimental study was conducted by building a lead-bismuth experimental circuit based on a heaving motion platform. Under the influence of heaving motion, the flow rate of lead-bismuth circuit fluctuates and the flow resistance and heat transfer characteristics change. In this paper, the flow resistance and heat transfer characteristics of liquid lead-bismuth eutectic in a vertical circular tube under forced circulation under heaving conditions are investigated experimentally. The range of Reynolds number (Re) in the flow resistance experiment is 23 500-261 280, and the range of Peclet number (Pe) in the flow heat transfer experiment is 524-4 450. The results show that: The peak value of instantaneous additional pressure drop caused by heaving motion is lower than the theoretical value; The heaving motion causes periodic fluctuations in the flow rate of the circuit, and the maximum fluctuation is up to 16% in the low Re region; In the low Re region, the heaving condition makes the time-averaged frictional resistance coefficient of the pipe increase slightly; The relationship between the fluctuation of loop flow caused by undulating motion and the undulating acceleration and Re was obtained by fitting, which is in good agreement with the experimental results. This method can be used to predict the fluctuation of flow rate in the reactor at different coolant flow rates by heaving motion. In the scope of this experimental working condition, although the fluctuation causes the fluctuation of the flow rate, the instantaneous temperature difference between the inlet and outlet of the experimental section and the instantaneous heat transfer coefficient h of the experimental section do not fluctuate significantly, and the fluctuation has little impact on the instantaneous heat transfer characteristics. In the forced circulation, the heaving motion does not affect the heat transfer characteristics of the circuit. The results of this study can provide data reference for the engineering design of lead-bismuth reactor. © 2023 Atomic Energy Press. All rights reserved.
引用
收藏
页码：1504 / 1513
页数：9
相关论文
共 17 条
  • [1] GAO Puzhen, PANG Fengge, WANG Zhao-xiang, Mathematical model of primary coolant in nuclear power plant influenced by ocean condi-tions, Journal of Harbin Engineering University, 18, 1, pp. 24-27, (1997)
  • [2] ISSHIKI N., Effects of heaving and listing upon thermo-hydraulic performance and critical heat flux of water-cooled marine reactors, Nuclear Engineering and Design, 4, 2, pp. 138-162, (1966)
  • [3] MURATA H, SAW ADA K, KOBAYASHI M., Natural circulation characteristics of a marine reactor in rolling motion and heat transfer in the core, Nuclear Engineering and Design, 215, 1-2, pp. 69-85, (2002)
  • [4] DU Sijia, ZHANG Hong, Theoretical study on effect of ocean conditions on single-phase forced circulation, Nuclear Power Engineering, 30, 5, pp. 60-64, (2009)
  • [5] DU Sijia, ZHANG Hong, JIA Baoshan, Experimental research on single-phase heat transfer characteristics in a vertical circular tube under marine conditions [J], Nuclear Power Engineering, 32, 3, pp. 92-96, (2011)
  • [6] YAN B., Review of the nuclear reactor thermal hydraulic research in ocean motions, Nuclear Engineering and Design, 313, pp. 370-385, (2017)
  • [7] CHENG Kun, TAN Sichao, Research progress of nuclear reactor thermal-hydraulic characteristics under ocean conditions, Journal of Harbin Engineering University, 40, 4, pp. 655-662, (2019)
  • [8] MA Jian, LI Longjian, HUANG Yanping, Et al., Progress in investigations on thermo-hydraulic characteristics of ship nuclear reactors under ocean conditions, Nuclear Power Engineering, 32, 2, pp. 91-96, (2011)
  • [9] ROELOFS F., Thermal hydraulics aspects of liquid metal cooled nuclear reactors, (2018)
  • [10] WU Yican, WANG Minghuang, HUANG Qun-ying, Et al., Development status and prospects of lead-based reactors, Nuclear Science and Engineering, 35, 2, pp. 213-221, (2015)
12