Integrated control of solidification microstructure and melt pool dimensions in electron beam wire feed additive manufacturing of ti-6al-4v

被引：6
|
作者：
Gockel, Joy [1 ]
Beuth, Jack [1 ]
Taminger, Karen [2 ]
机构：
[1] Department of Mechanical Engineering, Carnegie Mellon University, 5000 Forbes Avenue, Pittsburgh,PA,15213, United States
[2] NASA Langley Research Center, MS 188A, Hampton,VA,23681, United States
来源：
Additive Manufacturing | 2014年 / 1卷
关键词：
D O I：
10.1016/j.addma.2014.09.004
中图分类号：
学科分类号：
摘要：
29
引用
收藏
页码：119 / 126
相关论文
共 50 条
  • [1] Integrated melt pool and microstructure control for Ti-6Al-4V thin wall additive manufacturing
    Gockel, J.
    Fox, J.
    Beuth, J.
    Hafley, R.
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2015, 31 (08) : 912 - 916
  • [2] Thermofluid Properties of Ti-6Al-4V Melt Pool in Powder-Bed Electron Beam Additive Manufacturing
    Rahman, M. Shafiqur
    Schilling, Paul J.
    Herrington, Paul D.
    Chakravarty, Uttam K.
    [J]. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2019, 141 (04):
  • [3] Comparative Analysis of Weld Microstructure in Ti-6Al-4V Samples Produced by Rolling and Wire-Feed Electron Beam Additive Manufacturing
    Panin, A. V.
    Kazachenok, M. S.
    Krukovsky, K. V.
    Kazantseva, L. A.
    Martynov, S. A.
    [J]. PHYSICAL MESOMECHANICS, 2023, 26 (06) : 643 - 655
  • [4] Microstructure and mechanical properties of Ti-6Al-4V cruciform structure fabricated by coaxial electron beam wire-feed additive manufacturing
    Wang, Mingzhi
    Hu, Jianan
    Zhu, Jing
    Zhang, Kai
    Kovalchuk, Dmytro
    Yang, Yi
    Wang, Hao
    Zhang, Lai-Chang
    Huang, Aijun
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 960
  • [5] Comparative Analysis of Weld Microstructure in Ti-6Al-4V Samples Produced by Rolling and Wire-Feed Electron Beam Additive Manufacturing
    A. V. Panin
    M. S. Kazachenok
    K. V. Krukovsky
    L. A. Kazantseva
    S. A. Martynov
    [J]. Physical Mesomechanics, 2023, 26 : 643 - 655
  • [6] Effect of heat input on the microstructure and mechanical properties of Ti-6Al-4V alloy repaired by wire-feed electron beam additive manufacturing
    Tao, Xuewei
    Han, Ke
    Zhang, Shaolong
    Zhu, Yihao
    Zhang, Baosen
    Yao, Zhengjun
    Liu, Haixia
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 25 : 4674 - 4685
  • [7] State of art on wire feed additive manufacturing of Ti-6Al-4V alloy
    Manoj, A.
    Rao, M. A.
    Basha, M. M.
    Basha, S. M.
    Sankar, M. R.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2020, 26 : 2608 - 2615
  • [8] Influence of ultrasonic excitation on the melt pool and microstructure characteristics of Ti-6Al-4V at powder bed fusion additive manufacturing solidification velocities
    Richter, Brodan
    Hocker, Samuel J. A.
    Frankforter, Erik L.
    Tayon, Wesley A.
    Glaessgen, Edward H.
    [J]. ADDITIVE MANUFACTURING, 2024, 89
  • [9] Solidification microstructure simulation of Ti-6Al-4V in metal additive manufacturing: A review
    Li, Jinghao
    Zhou, Xianglin
    Brochu, Mathieu
    Provatas, Nikolas
    Zhao, Yaoyao Fiona
    [J]. ADDITIVE MANUFACTURING, 2020, 31
  • [10] Location specific solidification microstructure control in electron beam melting of Ti-6Al-4V
    Narra, Sneha P.
    Cunningham, Ross
    Beuth, Jack
    Rollett, Anthony D.
    [J]. ADDITIVE MANUFACTURING, 2018, 19 : 160 - 166
12345