Adhesion of epoxy resin-poly(arylene ether ketone) blends to fibers

被引：0

作者：

Kalaev, D.V. ^{[1
]}

Brantseva, T.V. ^{[1
]}

Gorbatkina, Yu.A. ^{[1
]}

Kerber, M.L. ^{[1
]}

Kravchenko, T.P. ^{[1
]}

Salazkin, S.N. ^{[1
]}

Shaposhnikova, V.V. ^{[1
]}

机构：

[1] Univ. of Chemical Technology, Miusskaya pl. 9, Moscow, 125047, Russia

来源：

Vysokomolekularnye Soedineniya. Ser.A Ser.B Ser.C - Kratkie Soobshcheniya | 2003年 / 45卷 / 05期

关键词：

Adhesive joints - Bond strength (materials) - Epoxy resins - Phase interfaces - Polyether ether ketones - Steel - Wire;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The pull-out method was applied to study the adhesive strength of adhesive joints in which a blend composed of an ED-20 epoxy resin and poly(arylene ketone) served as an adhesive and a steel wire with a diameter of 150 μm and poly(amide) fibers with a diameter of 300 μm were used as substrates. The concentration of poly(arylene ketone) in the blends ranged from 5 to 15 wt %. It was shown that the introduction of a heat-resistant thermoplastic into the ED-20 resin leads to an increase in the strength of the polymer blend-fiber interface. The possible mechanisms were advanced to describe the increase in the adhesive strength of adhesive joints of polymer blends to fibers.

引用

页码：779 / 784

共 50 条

[1] Adhesion of epoxy resin-poly(arylene ether ketone) blends to fibers
Kalaev, DV
Brantseva, TV
Gorbatkina, YA
Kerber, ML
Kravchenko, TP
Salazkin, SN
Shaposhnikova, VV
[J]. POLYMER SCIENCE SERIES A, 2003, 45 (05) : 465 - 469
[2] BLENDS OF PHENOLPHTHALEIN POLY(ETHER ETHER KETONE) WITH PHENOXY AND EPOXY-RESIN
GUO, QP
HUANG, JY
LI, BY
CHEN, TL
ZHANG, HF
FENG, ZL
[J]. POLYMER, 1991, 32 (01) : 58 - 65
[3] Stereochemistry and miscibility of epoxy resin-poly(trimethylene terephthalate) blends
Chandran, Sarath
Antolasic, F.
Eichhorn, K. J.
Shanks, Robert A.
Thomas, S.
[J]. RSC ADVANCES, 2014, 4 (48) : 25420 - 25429
[4] Miscibility and mechanical properties of tetrafunctional epoxy resin/phenolphthalein poly(ether ether ketone) blends
Song, XZ
Zheng, SX
Huang, JY
Zhu, PP
Guo, QP
[J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2001, 79 (04) : 598 - 607
[5] Effects of curing temperature on the structure and properties of epoxy resin-poly(ε-caprolactam) blends
Luo, Xi
Liu, Xiao-Feng
Ding, Xiao-Min
Chen, Li
Chen, Si-Chong
Wang, Yu-Zhong
[J]. POLYMER, 2021, 228
[6] Cure kinetics and morphology of blends of epoxy resin with poly (ether ether ketone) containing pendant tertiary butyl groups
Francis, B
Poel, GV
Posada, F
Groeninckx, G
Rao, VL
Ramaswamy, R
Thomas, S
[J]. POLYMER, 2003, 44 (13) : 3687 - 3699
[7] Toughening of Epoxy Resin by Poly(ether ether ketone) with Pendant Fluorocarbon Groups
Luo, Ye
Zhang, Ming
Dang, Guodong
Li, Yan
An, Xuefeng
Chen, Chunhai
Yi, Xiaosu
[J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2011, 122 (03) : 1758 - 1765
[8] AQUEOUS POLY(ARYLENE ETHER ETHER KETONE) SUSPENSIONS
XIE, H
BRINK, AE
WRIGHT, K
FACINELLI, J
CHEN, CH
DAVIS, RM
RIFFLE, JS
[J]. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1994, 208 : 64 - POLY
[9] Studies on poly(ether ether ketone ketone) poly(ether biphenyl ether ketone ketone) copolymers and blends
Na, H
Yuan, J
Ni, YW
Zhang, WJ
Wu, ZW
Zhang, HF
Mo, ZS
[J]. CHEMICAL JOURNAL OF CHINESE UNIVERSITIES-CHINESE, 1997, 18 (05): : 826 - 828
[10] Studies on Poly(ether ether ketone ketone)-Poly(ether biphenyl ether ketone ketone) Copolymers and Blends
[J]. Kao Teng Hsueh Hsiao Hua Heush Hsueh Pao/ Chemical Journal of Chinese Universities, 18 (05):

← 1 2 3 4 5 →