Corona Performance of Double Pendulum Damper for UHV AC Transmission Lines

被引:0
|
作者
Quan S. [1 ]
Li F. [2 ]
Zhang R. [1 ]
Deng J. [1 ]
Zhang H. [1 ]
Yuan G. [1 ]
机构
[1] China Electric Power Research Institute, Hubei Province, Wuhan
[2] State Grid Corporation of China, Xicheng District, Beijing
来源
关键词
corona test; double pendulum damper; orthogonal test method; simulation calculation; ultra high voltage;
D O I
10.13335/j.1000-3673.pst.2022.1800
中图分类号
学科分类号
摘要
1ABSTRACT: The optimization of the structural parameters ameliorates the electric field distribution characteristics of the electric fittings. Therefore, by selecting the model parameter in the orthogonal experiments, we establishes the plane test model using the finite element analysis software ANSYS to study the electric field distribution influenced by the radius of the pendulum, the length of swing arm and the angles of the swing. In the range analysis, it can be seen that the radius of the pendulum is the most influential factor, followed by the swing arm length and the swing angle. The variance analysis results show that the most significant influences are the radius of the pendulum and the length of the swing arm, while the swing angle has no sense. Though the calculations, a corona test is carried out. The tendency of the corona inception and extinction voltage with the arm length and the pendulum radius diameter is obtained. The applied selection in the areas of 2km and below above the sea level is also obtained. The research results provides the reference data for practical engineerings and selections of the UHV transmission lines. © 2023 Power System Technology Press. All rights reserved.
引用
收藏
页码:4342 / 4348
页数:6
相关论文
共 22 条
  • [1] ZHANG Jun, LIU Peng, TENG Wentao, Design and optimization of corona-proof structure for wire connection hardware of 1000kV substation in ultra-high-altitude areas, Power System Technology, pp. 1-13
  • [2] LIN Yitong, AN Yunzhu, JIANG Zhipeng, Humidity influence on discharging process of ground wire corona under thundercloud background electric field[J], Power System Technology, 46, 6, pp. 2429-2437, (2022)
  • [3] HUANG Tingzheng, MO Juan, PENG Zongren, Optimization of anti-corona performance of FD-type damper for 330kV transmission lines in high altitude localities[J], Power System Technology, 36, 6, pp. 262-265, (2012)
  • [4] WANG Xiaohua, YOU Changfu, Effect of humidity on negative corona discharge of electrostatic precipitators[J], IEEE Transactions on Dielectrics and Electrical Insulation, 20, 5, pp. 1720-1726, (2013)
  • [5] Xi YANG, Naiyi LI, PENG Zongren, Potential distribution computation and structure optimization for composite cross-arms in 750 kV AC transmission line[J], IEEE Transactions on Dielectrics and Electrical Insulation, 21, 4, pp. 1660-1669, (2014)
  • [6] ZHOU Taotao, RUAN Jiangjun, DU Zhiye, Corona characteristics of HVDC shielding fittings in high altitude area[J], High Voltage Engineering, 43, 9, pp. 3036-3041, (2017)
  • [7] WANG Jialong, DENG Zhixiang, WU Hao, Electric field evaluation of ±400 kV converter quadrivalve corona shields in high altitude area[C], Proceedings of 2014 IEEE Conference on Electrical Insulation and Dielectric Phenomena, pp. 287-290, (2014)
  • [8] YANG Xi, LI Naiyi, LIAO Jintao, Equivalent electric field strength method used in corona test of rigid jumpers and fittings for UHVAC double circuit tension support[J], Power System Technology, 37, 12, pp. 3571-3576, (2013)
  • [9] YUE Bo, CHEN Dong, FU Ying, A static field equivalence method for simulation of fitting surface electric field in ±1100kV DC yards of converter stations[J], Power System Technology, 41, 11, pp. 3427-3434, (2017)
  • [10] QUAN Shanshan, Liang XIE, GU Lili, Experimental test on corona characteristics of rigid jumper for 1000kV UHVAC double circuit transmission lines on the same tower[J], Power System Technology, 38, 3, pp. 802-806, (2014)