Phase Difference Correction Method Based on Adaptive Sampling Applied in Power Systems with Wide Frequency Fluctuation Range

被引：0
|
作者：
Lin S. [1 ]
Chen L. [1 ]
机构：
[1] College of Electrical Engineering, Zhejiang University, Hangzhou
来源：
Lin, Shenli (lin_shenli@126.com) | 1600年 / Automation of Electric Power Systems Press卷 / 41期
关键词：
Adaptive sampling; Frequency fluctuation; Harmonic measurement; Phase difference correction method; Rate of frequency change;
D O I：
10.7500/AEPS20160802001
中图分类号：
学科分类号：
摘要：
The spectral leakage from asynchronous sampling is the main source of the measurement error for the phase difference correction method in the power harmonic analysis undergoing constant sampling. When making continuous measurement of the power signals in the wide frequency fluctuation range, the measurement of phase difference correction method may fail. An improved method based on adaptive sampling is presented. The real-time fundamental frequency is predicted according to the fundamental frequency of the previous measurement and the rate of change of frequency calculated in the previous measurement. The sampling rate is adjusted according to the predicted fundamental frequency in time to make the sampling rate match the real-time fundamental frequency. The variable-frequency power signals are simulated under the conditions of adaptive sampling and constant sampling, respectively. The results show that the accuracy of amplitudes is improved by one order of magnitude, that of phases 3 to 14 times and the time length of the window is 40% of that prescribed by IEC standard. This method reduces the spectral leakage from dynamic fundamental frequency offset and makes the phase difference correction method accurate and quick in the continuous harmonic measurement of the power systems in the wide frequency fluctuation range. © 2017 Automation of Electric Power Systems Press.
引用
收藏
页码：174 / 181
页数：7
相关论文
共 18 条
  • [1] Song S., Ma H., Xu G., Et al., Power harmonic analysis based on 5-term maximum-sidelobe-decay window interpolation, Automation of Electric Power Systems, 39, 22, pp. 83-89, (2015)
  • [2] Yao W., Teng Z., Tang Q., Et al., Power system phasor measurement and correction algorithm under asynchronous sampling, Chinese Journal of Scientific Instrument, 34, 7, pp. 1518-1524, (2013)
  • [3] Xiong J., Li Q., Yuan X., Et al., Detection methods of harmonic and inter-harmonics in power systems, Automation of Electric Power Systems, 37, 11, pp. 125-133, (2013)
  • [4] Jia Q., Yang X., Song Z., A window frequency shift algorithm for power system harmonic analysis, Proceedings of the CSEE, 34, 10, pp. 1631-1640, (2014)
  • [5] Huang C., Peng J., Liu G., Et al., Research on software synchronous sampling in measurement of period electric signals, Transactions of China Electrotechnical Society, 19, 1, pp. 75-79, (2004)
  • [6] Wang P., Zhou F., Huang Z., Et al., Harmonic and interharmonic detection algorithm based on time-domain quasi-synchronous technique, Chinese Journal of Scientific Instrument, 34, 2, pp. 275-280, (2013)
  • [7] Hao Z., Gu W., Chu J., Et al., A power network harmonic detection method based on the four-spectrum-line interpolation FFT, Power System Protection and Control, 42, 19, pp. 107-113, (2014)
  • [8] Zheng C., Ding K., Yang Z., Noise influence on frequency estimation accuracy from energy centrobaric correction method for discrete spectrum, Proceedings of the 2009 IEEE International Conference on Information and Automation, pp. 1477-1481
  • [9] Zeng J., Teng Z., Spectral centroid applications on power harmonic analysis, Proceedings of the CSEE, 33, 31, pp. 73-80, (2013)
  • [10] Zou P., Huang C., Jiang H., Et al., Method of harmonics and interharmonics measurement based on all-phase spectrum zoom and correction, Power System Technology, 40, 8, pp. 2496-2502, (2016)
12