Critical Load Failure Phenomenon and Mechanism of Integrally Geared Compressor

被引：0
|
作者：
Zhang M. [1 ]
Jiang Z. [1 ]
Zhu J. [1 ]
Gao J. [1 ]
机构：
[1] Diagnosis and Self-Recovery Engineering Research Center, Beijing University of Chemical Technology, Beijing
来源：
Jiang, Zhinong (jiangzhinong@263.net) | 1600年 / Chinese Mechanical Engineering Society卷 / 53期
关键词：
Critical load; Dynamics modeling; Fault diagnosis; Integrally geared compressor;
D O I：
10.3901/JME.2017.23.020
中图分类号：
学科分类号：
摘要：
Integrally geared compressor is characterized by compact and high efficiency machines, which widely used in modern process industry. The critical load failure phenomenon was found in an integrally geared compressor monitoring process. The relationship between support stiffness and critical speed is established by formula deduction, and then integrally geared compressor critical load failure mechanism is revealed. To analyse the critical load failure mechanism, a five-axial integrally geared compressor is used as the research object. The gear transmission system model, support bearing system model and rotor system model of the compressor is built, and the impact of gear transmission system, support bearing system and rotor system caused by adjusted load are analyzed and compared. The relationship between load and critical speed is obtained by dynamics model. The results show some critical speed coincides with the rated speed will result in the critical load failure phenomenon when adjusting the compressor load. Using polynomial fitting, different compressor load and critical speed function is gained, and the compressor load is calculated when critical load failure occurs. © 2017 Journal of Mechanical Engineering.
引用
收藏
页码：20 / 25
页数：5
相关论文
共 15 条
  • [1] Jin Y., Wen G., Lang B., Et al., Vibration diagnosis analysis of some multi-rotor compressor, Joournal of Vibration and Shock, 29, pp. 303-305, (2010)
  • [2] Li Y., Ao L., Li L., Et al., Dynamic analysis method of dynamic character coefficient of hydrodynamic journal bearing, Journal of Mechanical Engineering, 46, 21, pp. 48-53, (2010)
  • [3] Huang L., Finite element analysis for high-speed centrifugal compressor rotor dynamics, (2012)
  • [4] Wen L., Diao Q., Yang Y., Design of assembled centrifugal compressor with integral gear, Wind Turbine Technology, 4, pp. 34-36, (2009)
  • [5] Cheng Z., Niu D., Characteristics and trend of development for packaged centrifugal compressor, Wind Turbine Technology, 4, pp. 3-5, (2003)
  • [6] Wang G., Ma C., Comparison of multi-rotor assembled with the traditional single-rotor centrifugal compressor, Wind Turbine Technology, 3, pp. 14-17, (1998)
  • [7] Lee A.S., Ha J.W., Choi D.H., Coupled lateral and torsional vibration characteristics of a speed increasing geared rotor-bearing system, Journal of Sound and Vibration, 263, 4, pp. 725-742, (2003)
  • [8] Fei Z., Research on finite element modeling and dynamic behaviors of complex multi-rotor coupled Systems, (2013)
  • [9] Ma H., Pang X., Song R., Et al., Vibration response analysis of a geared rotor system considering the tip relief, Journal of Mechanical Engineering, 50, 7, pp. 39-45, (2014)
  • [10] Dou W., Zhang L., Liu Z., Study on the coupling flexural torsional vibration of rotor system of the high speed gear, Journal of Mechanical Engineering, 24, 4, pp. 385-393, (2011)
12