Dynamical Force Characteristics for Helical Planetary Gear Considering Loaded Tooth Contact of Multi-gears

被引：0
|
作者：
Jiang J. [1 ]
Fang Z. [2 ]
Liu H. [1 ]
机构：
[1] Key Lab. of Automotive Transportation Safety Techniques of Ministry of Transport, School of Automotive, Chang'an Univ., Xi'an
[2] School of Mechanical Eng., Northwestern Polytechnical Univ., Xi'an
来源：
| 1600年 / Sichuan University卷 / 52期
关键词：
Corner meshing impact; Dynamical force; Helical planetary gear; Load sharing coefficient; Loaded tooth contact analysis; Meshing stiffness;
D O I：
10.15961/j.jsuese.201801093
中图分类号：
学科分类号：
摘要：
With the wide use of helical planetary gears in the case of high-speed and heavy loads, the study of dynamic loads characteristics become great significance for reduction vibration and noises. Firstly, correctly describing meshing stiffness and meshing error of planetary gear was the top priority of dynamic analysis, so an approach of loaded tooth contact analysis for planetary gears (PLTCA) combining gear geometry analysis and mechanical analysis of tooth was proposed to calculate meshing stiffness of gears and corner meshing impact, which was prepared for further analysis of planetary gear dynamics. Secondly,considering time-varying meshing stiffness and corner meshing impact excitation, a lumped-parameter planetary gear model was established and forces responses were got by solving the dynamic equations with numerical method.The results showed that the dynamical meshing forces increase remarkably with the speed increase except resonance speed. Besides, installation error, especially the center distance error, is responsible for the difference in value of meshing stiffness, and lead to the more resonance speeds, furthermore. With floating planetary gear, the dynamic forces are reduced at the resonant speeds, and the dynamic meshing force of some gears are obviously reduced with increasing speeds due to the differences in value of meshing stiffness. © 2020, Editorial Department of Advanced Engineering Sciences. All right reserved.
引用
收藏
页码：161 / 167
页数：6
相关论文
共 23 条
  • [1] Kahraman A., Natural modes of planetary gear trains, Journal of Sound and Vibration, 173, 1, pp. 125-130, (1994)
  • [2] Lin J., Parker R.G., Structured vibration characteristics of planetary gears with unequally spaced planets, Journal of Sound and Vibration, 233, 5, pp. 921-928, (2000)
  • [3] Sun T., Shen Y., Sun Z., Et al., Study on nonlinear dynamic behavior planetary gear train dynamic model and governing equation, Journal of Mechanical Engineering, 38, 3, pp. 11-15, (2002)
  • [4] Eritenel T., Parker R.G., Modal properties of three-dimensional helical planetary gears, Journal of Sound and Vibration, 325, 1, pp. 397-420, (2009)
  • [5] Wu X., Parker R.G., Modal properties of planetary gears with an elastic continuum ring gear, Journal of Applied Mechanics, 75, 3, (2008)
  • [6] Ambarisha V.K., Parker R.G., Nonlinear dynamics of planetary gears using analytical and finite element models, Journal of Sound and Vibration, 302, 3, pp. 577-595, (2007)
  • [7] Singh A., Kahraman A., Ligata H., Internal gear strains and load sharing in planetary transmissions: Model and experiments, Journal of Mechanical Design, 130, 7, (2008)
  • [8] Singh A., Application of a system level model to study the planetary load sharing behavior, Journal of Mechanical Design, 127, 3, pp. 469-476, (2005)
  • [9] Kahramn A., Load sharing characteristics of planetary transmissions, Mechanism and Machine Theory, 29, 8, pp. 1151-1165, (1994)
  • [10] Guo Y., Parker R.G., Dynamic modeling and analysis of a planetary gear involving tooth wedging and bearing clearance nonlinearity, Proceedings of the ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, pp. 217-231, (2009)
123